Blockchain Explorer - Search the Blockchain BTC ETH BCH

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake
https://preview.redd.it/b80c05tnb9e51.jpg?width=2550&format=pjpg&auto=webp&s=850282c1a3962466ed44f73886dae1c8872d0f31
Submitted for consideration to The Great Reddit Scaling Bake-Off
Baked by the pastry chefs at Offchain Labs
Please send questions or comments to [[email protected] ](mailto:[email protected])
1. Overview
We're excited to submit Arbitrum Rollup for consideration to The Great Reddit Scaling Bake-Off. Arbitrum Rollup is the only Ethereum scaling solution that supports arbitrary smart contracts without compromising on Ethereum's security or adding points of centralization. For Reddit, this means that Arbitrum can not only scale the minting and transfer of Community Points, but it can foster a creative ecosystem built around Reddit Community Points enabling points to be used in a wide variety of third party applications. That's right -- you can have your cake and eat it too!
Arbitrum Rollup isn't just Ethereum-style. Its Layer 2 transactions are byte-for-byte identical to Ethereum, which means Ethereum users can continue to use their existing addresses and wallets, and Ethereum developers can continue to use their favorite toolchains and development environments out-of-the-box with Arbitrum. Coupling Arbitrum’s tooling-compatibility with its trustless asset interoperability, Reddit not only can scale but can onboard the entire Ethereum community at no cost by giving them the same experience they already know and love (well, certainly know).
To benchmark how Arbitrum can scale Reddit Community Points, we launched the Reddit contracts on an Arbitrum Rollup chain. Since Arbitrum provides full Solidity support, we didn't have to rewrite the Reddit contracts or try to mimic their functionality using an unfamiliar paradigm. Nope, none of that. We launched the Reddit contracts unmodified on Arbitrum Rollup complete with support for minting and distributing points. Like every Arbitrum Rollup chain, the chain included a bridge interface in which users can transfer Community Points or any other asset between the L1 and L2 chains. Arbitrum Rollup chains also support dynamic contract loading, which would allow third-party developers to launch custom ecosystem apps that integrate with Community Points on the very same chain that runs the Reddit contracts.
1.1 Why Ethereum
Perhaps the most exciting benefit of distributing Community Points using a blockchain is the ability to seamlessly port points to other applications and use them in a wide variety of contexts. Applications may include simple transfers such as a restaurant that allows Redditors to spend points on drinks. Or it may include complex smart contracts -- such as placing Community Points as a wager for a multiparty game or as collateral in a financial contract.
The common denominator between all of the fun uses of Reddit points is that it needs a thriving ecosystem of both users and developers, and the Ethereum blockchain is perhaps the only smart contract platform with significant adoption today. While many Layer 1 blockchains boast lower cost or higher throughput than the Ethereum blockchain, more often than not, these attributes mask the reality of little usage, weaker security, or both.
Perhaps another platform with significant usage will rise in the future. But today, Ethereum captures the mindshare of the blockchain community, and for Community Points to provide the most utility, the Ethereum blockchain is the natural choice.
1.2 Why Arbitrum
While Ethereum's ecosystem is unmatched, the reality is that fees are high and capacity is too low to support the scale of Reddit Community Points. Enter Arbitrum. Arbitrum Rollup provides all of the ecosystem benefits of Ethereum, but with orders of magnitude more capacity and at a fraction of the cost of native Ethereum smart contracts. And most of all, we don't change the experience from users. They continue to use the same wallets, addresses, languages, and tools.
Arbitrum Rollup is not the only solution that can scale payments, but it is the only developed solution that can scale both payments and arbitrary smart contracts trustlessly, which means that third party users can build highly scalable add-on apps that can be used without withdrawing money from the Rollup chain. If you believe that Reddit users will want to use their Community Points in smart contracts--and we believe they will--then it makes the most sense to choose a single scaling solution that can support the entire ecosystem, eliminating friction for users.
We view being able to run smart contracts in the same scaling solution as fundamentally critical since if there's significant demand in running smart contracts from Reddit's ecosystem, this would be a load on Ethereum and would itself require a scaling solution. Moreover, having different scaling solutions for the minting/distribution/spending of points and for third party apps would be burdensome for users as they'd have to constantly shuffle their Points back and forth.
2. Arbitrum at a glance
Arbitrum Rollup has a unique value proposition as it offers a combination of features that no other scaling solution achieves. Here we highlight its core attributes.
Decentralized. Arbitrum Rollup is as decentralized as Ethereum. Unlike some other Layer 2 scaling projects, Arbitrum Rollup doesn't have any centralized components or centralized operators who can censor users or delay transactions. Even in non-custodial systems, centralized components provide a risk as the operators are generally incentivized to increase their profit by extracting rent from users often in ways that severely degrade user experience. Even if centralized operators are altruistic, centralized components are subject to hacking, coercion, and potential liability.
Massive Scaling. Arbitrum achieves order of magnitude scaling over Ethereum's L1 smart contracts. Our software currently supports 453 transactions-per-second for basic transactions (at 1616 Ethereum gas per tx). We have a lot of room left to optimize (e.g. aggregating signatures), and over the next several months capacity will increase significantly. As described in detail below, Arbitrum can easily support and surpass Reddit's anticipated initial load, and its capacity will continue to improve as Reddit's capacity needs grow.
Low cost. The cost of running Arbitrum Rollup is quite low compared to L1 Ethereum and other scaling solutions such as those based on zero-knowledge proofs. Layer 2 fees are low, fixed, and predictable and should not be overly burdensome for Reddit to cover. Nobody needs to use special equipment or high-end machines. Arbitrum requires validators, which is a permissionless role that can be run on any reasonable on-line machine. Although anybody can act as a validator, in order to protect against a “tragedy of the commons” and make sure reputable validators are participating, we support a notion of “invited validators” that are compensated for their costs. In general, users pay (low) fees to cover the invited validators’ costs, but we imagine that Reddit may cover this cost for its users. See more on the costs and validator options below.
Ethereum Developer Experience. Not only does Arbitrum support EVM smart contracts, but the developer experience is identical to that of L1 Ethereum contracts and fully compatible with Ethereum tooling. Developers can port existing Solidity apps or write new ones using their favorite and familiar toolchains (e.g. Truffle, Buidler). There are no new languages or coding paradigms to learn.
Ethereum wallet compatibility. Just as in Ethereum, Arbitrum users need only hold keys, but do not have to store any coin history or additional data to protect or access their funds. Since Arbitrum transactions are semantically identical to Ethereum L1 transactions, existing Ethereum users can use their existing Ethereum keys with their existing wallet software such as Metamask.
Token interoperability. Users can easily transfer their ETH, ERC-20 and ERC-721 tokens between Ethereum and the Arbitrum Rollup chain. As we explain in detail below, it is possible to mint tokens in L2 that can subsequently be withdrawn and recognized by the L1 token contract.
Fast finality. Transactions complete with the same finality time as Ethereum L1 (and it's possible to get faster finality guarantees by trading away trust assumptions; see the Arbitrum Rollup whitepaper for details).
Non-custodial. Arbitrum Rollup is a non-custodial scaling solution, so users control their funds/points and neither Reddit nor anyone else can ever access or revoke points held by users.
Censorship Resistant. Since it's completely decentralized, and the Arbitrum protocol guarantees progress trustlessly, Arbitrum Rollup is just as censorship-proof as Ethereum.
Block explorer. The Arbitrum Rollup block explorer allows users to view and analyze transactions on the Rollup chain.
Limitations
Although this is a bake-off, we're not going to sugar coat anything. Arbitrum Rollup, like any Optimistic Rollup protocol, does have one limitation, and that's the delay on withdrawals.
As for the concrete length of the delay, we've done a good deal of internal modeling and have blogged about this as well. Our current modeling suggests a 3-hour delay is sufficient (but as discussed in the linked post there is a tradeoff space between the length of the challenge period and the size of the validators’ deposit).
Note that this doesn't mean that the chain is delayed for three hours. Arbitrum Rollup supports pipelining of execution, which means that validators can keep building new states even while previous ones are “in the pipeline” for confirmation. As the challenge delays expire for each update, a new state will be confirmed (read more about this here).
So activity and progress on the chain are not delayed by the challenge period. The only thing that's delayed is the consummation of withdrawals. Recall though that any single honest validator knows immediately (at the speed of L1 finality) which state updates are correct and can guarantee that they will eventually be confirmed, so once a valid withdrawal has been requested on-chain, every honest party knows that the withdrawal will definitely happen. There's a natural place here for a liquidity market in which a validator (or someone who trusts a validator) can provide withdrawal loans for a small interest fee. This is a no-risk business for them as they know which withdrawals will be confirmed (and can force their confirmation trustlessly no matter what anyone else does) but are just waiting for on-chain finality.
3. The recipe: How Arbitrum Rollup works
For a description of the technical components of Arbitrum Rollup and how they interact to create a highly scalable protocol with a developer experience that is identical to Ethereum, please refer to the following documents:
Arbitrum Rollup Whitepaper
Arbitrum academic paper (describes a previous version of Arbitrum)
4. Developer docs and APIs
For full details about how to set up and interact with an Arbitrum Rollup chain or validator, please refer to our developer docs, which can be found at https://developer.offchainlabs.com/.
Note that the Arbitrum version described on that site is older and will soon be replaced by the version we are entering in Reddit Bake-Off, which is still undergoing internal testing before public release.
5. Who are the validators?
As with any Layer 2 protocol, advancing the protocol correctly requires at least one validator (sometimes called block producers) that is honest and available. A natural question is: who are the validators?
Recall that the validator set for an Arbitrum chain is open and permissionless; anyone can start or stop validating at will. (A useful analogy is to full nodes on an L1 chain.) But we understand that even though anyone can participate, Reddit may want to guarantee that highly reputable nodes are validating their chain. Reddit may choose to validate the chain themselves and/or hire third-party validators.To this end, we have begun building a marketplace for validator-for-hire services so that dapp developers can outsource validation services to reputable nodes with high up-time. We've announced a partnership in which Chainlink nodes will provide Arbitrum validation services, and we expect to announce more partnerships shortly with other blockchain infrastructure providers.
Although there is no requirement that validators are paid, Arbitrum’s economic model tracks validators’ costs (e.g. amount of computation and storage) and can charge small fees on user transactions, using a gas-type system, to cover those costs. Alternatively, a single party such as Reddit can agree to cover the costs of invited validators.
6. Reddit Contract Support
Since Arbitrum contracts and transactions are byte-for-byte compatible with Ethereum, supporting the Reddit contracts is as simple as launching them on an Arbitrum chain.
Minting. Arbitrum Rollup supports hybrid L1/L2 tokens which can be minted in L2 and then withdrawn onto the L1. An L1 contract at address A can make a special call to the EthBridge which deploys a "buddy contract" to the same address A on an Arbitrum chain. Since it's deployed at the same address, users can know that the L2 contract is the authorized "buddy" of the L1 contract on the Arbitrum chain.
For minting, the L1 contract is a standard ERC-20 contract which mints and burns tokens when requested by the L2 contract. It is paired with an ERC-20 contract in L2 which mints tokens based on whatever programmer provided minting facility is desired and burns tokens when they are withdrawn from the rollup chain. Given this base infrastructure, Arbitrum can support any smart contract based method for minting tokens in L2, and indeed we directly support Reddit's signature/claim based minting in L2.
Batch minting. What's better than a mint cookie? A whole batch! In addition to supporting Reddit’s current minting/claiming scheme, we built a second minting design, which we believe outperforms the signature/claim system in many scenarios.
In the current system, Reddit periodically issues signed statements to users, who then take those statements to the blockchain to claim their tokens. An alternative approach would have Reddit directly submit the list of users/amounts to the blockchain and distribute the tokens to the users without the signature/claim process.
To optimize the cost efficiency of this approach, we designed an application-specific compression scheme to minimize the size of the batch distribution list. We analyzed the data from Reddit's previous distributions and found that the data is highly compressible since token amounts are small and repeated, and addresses appear multiple times. Our function groups transactions by size, and replaces previously-seen addresses with a shorter index value. We wrote client code to compress the data, wrote a Solidity decompressing function, and integrated that function into Reddit’s contract running on Arbitrum.
When we ran the compression function on the previous Reddit distribution data, we found that we could compress batched minting data down to to 11.8 bytes per minting event (averaged over a 6-month trace of Reddit’s historical token grants)compared with roughly 174 bytes of on-chain data needed for the signature claim approach to minting (roughly 43 for an RLP-encoded null transaction + 65 for Reddit's signature + 65 for the user's signature + roughly 8 for the number of Points) .
The relative benefit of the two approaches with respect to on-chain call data cost depends on the percentage of users that will actually claim their tokens on chain. With the above figures, batch minting will be cheaper if roughly 5% of users redeem their claims. We stress that our compression scheme is not Arbitrum-specific and would be beneficial in any general-purpose smart contract platform.
8. Benchmarks and costs
In this section, we give the full costs of operating the Reddit contracts on an Arbitrum Rollup chain including the L1 gas costs for the Rollup chain, the costs of computation and storage for the L2 validators as well as the capital lockup requirements for staking.
Arbitrum Rollup is still on testnet, so we did not run mainnet benchmarks. Instead, we measured the L1 gas cost and L2 workload for Reddit operations on Arbitrum and calculated the total cost assuming current Ethereum gas prices. As noted below in detail, our measurements do not assume that Arbitrum is consuming the entire capacity of Ethereum. We will present the details of our model now, but for full transparency you can also play around with it yourself and adjust the parameters, by copying the spreadsheet found here.
Our cost model is based on measurements of Reddit’s contracts, running unmodified (except for the addition of a batch minting function) on Arbitrum Rollup on top of Ethereum.
On the distribution of transactions and frequency of assertions. Reddit's instructions specify the following minimum parameters that submissions should support:
Over a 5 day period, your scaling PoC should be able to handle:
  • 100,000 point claims (minting & distributing points)
  • 25,000 subscriptions
  • 75,000 one-off points burning
  • 100,000 transfers
We provide the full costs of operating an Arbitrum Rollup chain with this usage under the assumption that tokens are minted or granted to users in batches, but other transactions are uniformly distributed over the 5 day period. Unlike some other submissions, we do not make unrealistic assumptions that all operations can be submitted in enormous batches. We assume that batch minting is done in batches that use only a few percent on an L1 block’s gas, and that other operations come in evenly over time and are submitted in batches, with one batch every five minutes to keep latency reasonable. (Users are probably already waiting for L1 finality, which takes at least that long to achieve.)
We note that assuming that there are only 300,000 transactions that arrive uniformly over the 5 day period will make our benchmark numbers lower, but we believe that this will reflect the true cost of running the system. To see why, say that batches are submitted every five minutes (20 L1 blocks) and there's a fixed overhead of c bytes of calldata per batch, the cost of which will get amortized over all transactions executed in that batch. Assume that each individual transaction adds a marginal cost of t. Lastly assume the capacity of the scaling system is high enough that it can support all of Reddit's 300,000 transactions within a single 20-block batch (i.e. that there is more than c + 300,000*t byes of calldata available in 20 blocks).
Consider what happens if c, the per-batch overhead, is large (which it is in some systems, but not in Arbitrum). In the scenario that transactions actually arrive at the system's capacity and each batch is full, then c gets amortized over 300,000 transactions. But if we assume that the system is not running at capacity--and only receives 300,000 transactions arriving uniformly over 5 days-- then each 20-block assertion will contain about 200 transactions, and thus each transaction will pay a nontrivial cost due to c.
We are aware that other proposals presented scaling numbers assuming that 300,000 transactions arrived at maximum capacity and was executed in a single mega-transaction, but according to our estimates, for at least one such report, this led to a reported gas price that was 2-3 orders of magnitude lower than it would have been assuming uniform arrival. We make more realistic batching assumptions, and we believe Arbitrum compares well when batch sizes are realistic.
Our model. Our cost model includes several sources of cost:
  • L1 gas costs: This is the cost of posting transactions as calldata on the L1 chain, as well as the overhead associated with each batch of transactions, and the L1 cost of settling transactions in the Arbitrum protocol.
  • Validator’s staking costs: In normal operation, one validator will need to be staked. The stake is assumed to be 0.2% of the total value of the chain (which is assumed to be $1 per user who is eligible to claim points). The cost of staking is the interest that could be earned on the money if it were not staked.
  • Validator computation and storage: Every validator must do computation to track the chain’s processing of transactions, and must maintain storage to keep track of the contracts’ EVM storage. The cost of computation and storage are estimated based on measurements, with the dollar cost of resources based on Amazon Web Services pricing.
It’s clear from our modeling that the predominant cost is for L1 calldata. This will probably be true for any plausible rollup-based system.
Our model also shows that Arbitrum can scale to workloads much larger than Reddit’s nominal workload, without exhausting L1 or L2 resources. The scaling bottleneck will ultimately be calldata on the L1 chain. We believe that cost could be reduced substantially if necessary by clever encoding of data. (In our design any compression / decompression of L2 transaction calldata would be done by client software and L2 programs, never by an L1 contract.)
9. Status of Arbitrum Rollup
Arbitrum Rollup is live on Ethereum testnet. All of the code written to date including everything included in the Reddit demo is open source and permissively licensed under the Apache V2 license. The first testnet version of Arbitrum Rollup was released on testnet in February. Our current internal version, which we used to benchmark the Reddit contracts, will be released soon and will be a major upgrade.
Both the Arbitrum design as well as the implementation are heavily audited by independent third parties. The Arbitrum academic paper was published at USENIX Security, a top-tier peer-reviewed academic venue. For the Arbitrum software, we have engaged Trail of Bits for a security audit, which is currently ongoing, and we are committed to have a clean report before launching on Ethereum mainnet.
10. Reddit Universe Arbitrum Rollup Chain
The benchmarks described in this document were all measured using the latest internal build of our software. When we release the new software upgrade publicly we will launch a Reddit Universe Arbitrum Rollup chain as a public demo, which will contain the Reddit contracts as well as a Uniswap instance and a Connext Hub, demonstrating how Community Points can be integrated into third party apps. We will also allow members of the public to dynamically launch ecosystem contracts. We at Offchain Labs will cover the validating costs for the Reddit Universe public demo.
If the folks at Reddit would like to evaluate our software prior to our public demo, please email us at [email protected] and we'd be more than happy to provide early access.
11. Even more scaling: Arbitrum Sidechains
Rollups are an excellent approach to scaling, and we are excited about Arbitrum Rollup which far surpasses Reddit's scaling needs. But looking forward to Reddit's eventual goal of supporting hundreds of millions of users, there will likely come a time when Reddit needs more scaling than any Rollup protocol can provide.
While Rollups greatly reduce costs, they don't break the linear barrier. That is, all transactions have an on-chain footprint (because all calldata must be posted on-chain), albeit a far smaller one than on native Ethereum, and the L1 limitations end up being the bottleneck for capacity and cost. Since Ethereum has limited capacity, this linear use of on-chain resources means that costs will eventually increase superlinearly with traffic.
The good news is that we at Offchain Labs have a solution in our roadmap that can satisfy this extreme-scaling setting as well: Arbitrum AnyTrust Sidechains. Arbitrum Sidechains are similar to Arbitrum Rollup, but deviate in that they name a permissioned set of validators. When a chain’s validators agree off-chain, they can greatly reduce the on-chain footprint of the protocol and require almost no data to be put on-chain. When validators can't reach unanimous agreement off-chain, the protocol reverts to Arbitrum Rollup. Technically, Arbitrum Sidechains can be viewed as a hybrid between state channels and Rollup, switching back and forth as necessary, and combining the performance and cost that state channels can achieve in the optimistic case, with the robustness of Rollup in other cases. The core technical challenge is how to switch seamlessly between modes and how to guarantee that security is maintained throughout.
Arbitrum Sidechains break through this linear barrier, while still maintaining a high level of security and decentralization. Arbitrum Sidechains provide the AnyTrust guarantee, which says that as long as any one validator is honest and available (even if you don't know which one will be), the L2 chain is guaranteed to execute correctly according to its code and guaranteed to make progress. Unlike in a state channel, offchain progress does not require unanimous consent, and liveness is preserved as long as there is a single honest validator.
Note that the trust model for Arbitrum Sidechains is much stronger than for typical BFT-style chains which introduce a consensus "voting" protocols among a small permissioned group of validators. BFT-based protocols require a supermajority (more than 2/3) of validators to agree. In Arbitrum Sidechains, by contrast, all you need is a single honest validator to achieve guaranteed correctness and progress. Notice that in Arbitrum adding validators strictly increases security since the AnyTrust guarantee provides correctness as long as any one validator is honest and available. By contrast, in BFT-style protocols, adding nodes can be dangerous as a coalition of dishonest nodes can break the protocol.
Like Arbitrum Rollup, the developer and user experiences for Arbitrum Sidechains will be identical to that of Ethereum. Reddit would be able to choose a large and diverse set of validators, and all that they would need to guarantee to break through the scaling barrier is that a single one of them will remain honest.
We hope to have Arbitrum Sidechains in production in early 2021, and thus when Reddit reaches the scale that surpasses the capacity of Rollups, Arbitrum Sidechains will be waiting and ready to help.
While the idea to switch between channels and Rollup to get the best of both worlds is conceptually simple, getting the details right and making sure that the switch does not introduce any attack vectors is highly non-trivial and has been the subject of years of our research (indeed, we were working on this design for years before the term Rollup was even coined).
12. How Arbitrum compares
We include a comparison to several other categories as well as specific projects when appropriate. and explain why we believe that Arbitrum is best suited for Reddit's purposes. We focus our attention on other Ethereum projects.
Payment only Rollups. Compared to Arbitrum Rollup, ZK-Rollups and other Rollups that only support token transfers have several disadvantages:
  • As outlined throughout the proposal, we believe that the entire draw of Ethereum is in its rich smart contracts support which is simply not achievable with today's zero-knowledge proof technology. Indeed, scaling with a ZK-Rollup will add friction to the deployment of smart contracts that interact with Community Points as users will have to withdraw their coins from the ZK-Rollup and transfer them to a smart contract system (like Arbitrum). The community will be best served if Reddit builds on a platform that has built-in, frictionless smart-contract support.
  • All other Rollup protocols of which we are aware employ a centralized operator. While it's true that users retain custody of their coins, the centralized operator can often profit from censoring, reordering, or delaying transactions. A common misconception is that since they're non-custodial protocols, a centralized sequencer does not pose a risk but this is incorrect as the sequencer can wreak havoc or shake down users for side payments without directly stealing funds.
  • Sidechain type protocols can eliminate some of these issues, but they are not trustless. Instead, they require trust in some quorum of a committee, often requiring two-third of the committee to be honest, compared to rollup protocols like Arbitrum that require only a single honest party. In addition, not all sidechain type protocols have committees that are diverse, or even non-centralized, in practice.
  • Plasma-style protocols have a centralized operator and do not support general smart contracts.
13. Concluding Remarks
While it's ultimately up to the judges’ palate, we believe that Arbitrum Rollup is the bakeoff choice that Reddit kneads. We far surpass Reddit's specified workload requirement at present, have much room to optimize Arbitrum Rollup in the near term, and have a clear path to get Reddit to hundreds of millions of users. Furthermore, we are the only project that gives developers and users the identical interface as the Ethereum blockchain and is fully interoperable and tooling-compatible, and we do this all without any new trust assumptions or centralized components.
But no matter how the cookie crumbles, we're glad to have participated in this bake-off and we thank you for your consideration.
About Offchain Labs
Offchain Labs, Inc. is a venture-funded New York company that spun out of Princeton University research, and is building the Arbitrum platform to usher in the next generation of scalable, interoperable, and compatible smart contracts. Offchain Labs is backed by Pantera Capital, Compound VC, Coinbase Ventures, and others.
Leadership Team
Ed Felten
Ed Felten is Co-founder and Chief Scientist at Offchain Labs. He is on leave from Princeton University, where he is the Robert E. Kahn Professor of Computer Science and Public Affairs. From 2015 to 2017 he served at the White House as Deputy United States Chief Technology Officer and senior advisor to the President. He is an ACM Fellow and member of the National Academy of Engineering. Outside of work, he is an avid runner, cook, and L.A. Dodgers fan.
Steven Goldfeder
Steven Goldfeder is Co-founder and Chief Executive Officer at Offchain Labs. He holds a PhD from Princeton University, where he worked at the intersection of cryptography and cryptocurrencies including threshold cryptography, zero-knowledge proof systems, and post-quantum signatures. He is a co-author of Bitcoin and Cryptocurrency Technologies, the leading textbook on cryptocurrencies, and he has previously worked at Google and Microsoft Research, where he co-invented the Picnic signature algorithm. When not working, you can find Steven spending time with his family, taking a nature walk, or twisting balloons.
Harry Kalodner
Harry Kalodner is Co-founder and Chief Technology Officer at Offchain Labs where he leads the engineering team. Before the company he attended Princeton as a Ph.D candidate where his research explored economics, anonymity, and incentive compatibility of cryptocurrencies, and he also has worked at Apple. When not up at 3:00am writing code, Harry occasionally sleeps.
submitted by hkalodner to ethereum [link] [comments]

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

https://preview.redd.it/rqt2dldyg8e51.jpg?width=1044&format=pjpg&auto=webp&s=777ae9d4fbbb54c3540682b72700fc4ba3de0a44
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.

Solutions

Syscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
  1. Distribution, burns and user-to-user transfers of Reddit Points are entirely carried out on the Syscoin network. This full-on approach to utilizing the Syscoin network provides the most scalability and transaction cost benefits of these scenarios. The tradeoff here is distribution and subscription handling likely migrating away from smart contracts into the application layer.
  2. The Reddit Community Points ecosystem can continue to use existing smart contracts as they are used today on the Ethereum mainchain. Users migrate a portion of their tokens to Syscoin, the scaling network, to gain much lower fees, scalability, and a proven base layer, without sacrificing sovereign ownership. They would use Syscoin for user-to-user transfers. Tips redeemable in ten seconds or less, a high-throughput relay network, and onchain settlement at a block target of 60 seconds.
  3. Integration between Matic Network and Syscoin Platform - similar to Syscoin’s current integration with Ethereum - will provide Reddit Community Points with EVM scalability (including the Memberships ERC777 operator) on the Matic side, and performant simple value transfers, robust decentralized security, and sovereign store-of-value on the Syscoin side. It’s “the best of both worlds”. The trade-off is more complex interoperability.

Syscoin + Matic Integration

Matic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.

Proving Performance & Cost Savings

Our POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
612722: https://sys1.bcfn.ca/block/6d47796d043bb4c508d29123e6ae81b051f5e0aaef849f253c8f3a6942a022ce
612723: https://sys1.bcfn.ca/block/8e2077f743461b90f80b4bef502f564933a8e04de97972901f3d65cfadcf1faf
612724: https://sys1.bcfn.ca/block/205436d25b1b499fce44c29567c5c807beaca915b83cc9f3c35b0d76dbb11f6e
612725: https://sys1.bcfn.ca/block/776d1b1a0f90f655a6bbdf559ff5072459cbdc5682d7615ff4b78c00babdc237
612726: https://sys1.bcfn.ca/block/de4df0994253742a1ac8ac9eec8d2a8c8b0a6d72c53d6f3caa29bb6c171b0a6b
612727: https://sys1.bcfn.ca/block/e5e167c52a9decb313fbaadf49a5e34cb490f8084f642a850385476d4ef10d70
612728: https://sys1.bcfn.ca/block/ab64d989edc71890e7b5b8491c20e9a27520dc45a5f7c776d3dae79057f59fe7
612729: https://sys1.bcfn.ca/block/5e8b7ecd0e36f99d07e4ea6e135fc952bf7ec30164ab6f4d1e98b0f2d405df6d
612730: https://sys1.bcfn.ca/block/d395df3d31dde60bbb0bece6bd5b358297da878f0beb96be389e5f0e043580a3
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.

Cost Savings

Total cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.

Tools, Infrastructure & Documentation

Syscoin Bridge

Mainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
  • Any Standard ERC-20 token to be moved from Ethereum to the Syscoin blockchain as a Syscoin Platform Token (SPT), and back to Ethereum
  • Any SPT to be moved from Syscoin to the Ethereum blockchain as an ERC-20 token, and back to Syscoin

Benefits

  • Permissionless
  • No counterparties involved
  • No trading mechanisms involved
  • No third-party liquidity providers required
  • Cross-chain Fractional Supply - 2-way peg - Token supply maintained globally
  • ERC-20s gain vastly improved transactionality with the Syscoin Token Platform, along with the security of bitcoin-core-compliant PoW.
  • SPTs gain access to all the tooling, applications and capabilities of Ethereum for ERC-20, including smart contracts.
https://preview.redd.it/l8t2m8ldh8e51.png?width=1180&format=png&auto=webp&s=b0a955a0181746dc79aff718bd0bf607d3c3aa23
https://preview.redd.it/26htnxzfh8e51.png?width=1180&format=png&auto=webp&s=d0383d3c2ee836c9f60b57eca35542e9545f741d

Source code

https://github.com/syscoin/?q=sysethereum
Main Subprojects

API

Tools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.

Documentation

Syscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence

Trade-off

The Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.

Cost

Ethereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.

Z-DAG

Zero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).

Benefits

  • Unique fee-market that is more efficient for microtransaction redemption and settlement
  • Uses decentralized means to enable tokens with value transfer scalability that is comparable or exceeds that of credit card networks
  • Provides high throughput and secure fulfillment even if blocks are full
  • Probabilistic and interactive
  • 99.9999% security assurance within 10 seconds
  • Can serve payment channels as a resilience fallback that is faster and lower-cost than falling-back directly to a blockchain
  • Each Z-DAG transaction also settles onchain through Syscoin Core at 60-second block target using SHA-256 Proof of Work consensus
https://preview.redd.it/pgbx84jih8e51.png?width=1614&format=png&auto=webp&s=5f631d42a33dc698365eb8dd184b6d442def6640

Source code

https://github.com/syscoin/syscoin

API

Syscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.

Documentation

Z-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana

Trade-off

Z-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.

Syscoin Specs

Syscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
  • 16MB block bandwidth per minute assuming segwit witness carrying transactions, and transactions ~200 bytes on average
  • SHA256 merge mined with Bitcoin
  • UTXO asset layer, with base Syscoin layer sharing identical security policies as Bitcoin Core
  • Z-DAG on asset layer, bridge to Ethereum on asset layer
  • On-chain scaling with prospect of enabling enterprise grade reliable trustless payment processing with on/offchain hybrid solution
  • Focus only on Simple Value Transfers. MVP of blockchain consensus footprint is balances and ownership of them. Everything else can reduce data availability in exchange for scale (Ethereum 2.0 model). We leave that to other designs, we focus on transfers.
  • Future integrations of MAST/Taproot to get more complex value transfers without trading off trustlessness or decentralization.
  • Zero-knowledge Proofs are a cryptographic new frontier. We are dabbling here to generalize the concept of bridging and also verify the state of a chain efficiently. We also apply it in our Digital Identity projects at Blockchain Foundry (a publicly traded company which develops Syscoin softwares for clients). We are also looking to integrate privacy preserving payment channels for off-chain payments through zkSNARK hub & spoke design which does not suffer from the HTLC attack vectors evident on LN. Much of the issues plaguing Lightning Network can be resolved using a zkSNARK design whilst also providing the ability to do a multi-asset payment channel system. Currently we found a showstopper attack (American Call Option) on LN if we were to use multiple-assets. This would not exist in a system such as this.

Wallets

Web3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
Syscoin-Qt

Explorers

Mainnet: https://sys1.bcfn.ca (Blockbook)
Testnet: https://explorer-testnet.blockchainfoundry.co

Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!

submitted by sidhujag to ethereum [link] [comments]

Filecoin | Development Status and Mining Progress

Author: Gamals Ahmed, CoinEx Business Ambassador
https://preview.redd.it/5bqakdqgl3g51.jpg?width=865&format=pjpg&auto=webp&s=b709794863977eb6554e3919b9e00ca750e3e704
A decentralized storage network that transforms cloud storage into an account market. Miners obtain the integrity of the original protocol by providing data storage and / or retrieval. On the contrary, customers pay miners to store or distribute data and retrieve it.
Filecoin announced, that there will be more delays before its main network is officially launched.
Filecoin developers postponed the release date of their main network to late July to late August 2020.
As mentioned in a recent announcement, the Filecoin team said that the initiative completed the first round of the internal protocol security audit. Platform developers claim that the results of the review showed that they need to make several changes to the protocol’s code base before performing the second stage of the software testing process.
Created by Protocol Labs, Filecoin was developed using File System (IPFS), which is a peer-to-peer data storage network. Filecoin will allow users to trade storage space in an open and decentralized market.
Filecoin developers implemented one of the largest cryptocurrency sales in 2017. They have privately obtained over $ 200 million from professional or accredited investors, including many institutional investors.
The main network was slated to launch last month, but in February 2020, the Philly Queen development team delayed the release of the main network between July 15 and July 17, 2020.
They claimed that the outbreak of the Coronavirus (COVID-19) in China was the main cause of the delay. The developers now say that they need more time to solve the problems found during a recent codecase audit.
The Filecoin team noted the following:
“We have drafted a number of protocol changes to ensure that building our major network launch is safe and economically sound.” The project developers will add them to two different implementations of Filecoin (Lotus and go-filecoin) in the coming weeks.
Filecoin developers conducted a survey to allow platform community members to cast their votes on three different launch dates for Testnet Phase 2 and mainnet.
The team reported that the community gave their votes. Based on the vote results, the Filecoin team announced a “conservative” estimate that the second phase of the network test should begin by May 11, 2020. The main Filecoin network may be launched sometime between July 20 and August 21, 2020.
The updates to the project can be found on the Filecoin Road Map.
Filecoin developers stated:
“This option will make us get the most important protocol changes first, and then implement the rest as protocol updates during testnet.” Filecoin is back down from the final test stage.
Another filecoin decentralized storage network provider launched its catalytic test network, the final stage of the storage network test that supports the blockchain.
In a blog post on her website, Filecoin said she will postpone the last test round until August. The company also announced a calibration period from July 20 to August 3 to allow miners to test their mining settings and get an idea of how competition conditions affected their rewards.
Filecoin had announced earlier last month that the catalytic testnet test would precede its flagship launch. The delay in the final test also means that the company has returned the main launch window between August 31 and September 21.
Despite the lack of clear incentives for miners and multiple delays, Filecoin has succeeded in attracting huge interest, especially in China. Investors remained highly speculating on the network’s mining hardware and its premium price.
Mining in Filecoin
In most blockchain protocols, “miners” are network participants who do the work necessary to promote and maintain the blockchain. To provide these services, miners are compensated in the original cryptocurrency.
Mining in Filecoin works completely differently — instead of contributing to computational power, miners contribute storage capacity to use for dealing with customers looking to store data.
Filecoin will contain several types of miners:
Storage miners responsible for storing files and data on the network. Miners retrieval, responsible for providing quick tubes for file recovery. Miners repair to be carried out.
Storage miners are the heart of the network. They earn Filecoin by storing data for clients, and computerizing cipher directories to check storage over time. The probability of earning the reward reward and transaction fees is proportional to the amount of storage that the Miner contributes to the Filecoin network, not the hash power.
Retriever miners are the veins of the network. They earn Filecoin by winning bids and mining fees for a specific file, which is determined by the market value of the said file size. Miners bandwidth and recovery / initial transaction response time will determine its ability to close recovery deals on the network.
The maximum bandwidth of the recovery miners will determine the total amount of deals that it can enter into.
In the current implementation, the focus is mostly on storage miners, who sell storage capacity for FIL.

Hardware recommendations

The current system specifications recommended for running the miner are:
Compared to the hardware requirements for running a validity checker, these standards are much higher — although they definitely deserve it. Since these will not increase in the presumed future, the money spent on Filecoin mining hardware will provide users with many years of reliable service, and they pay themselves many times. Think of investing as a small business for cloud storage. To launch a model on the current data hosting model, it will cost millions of dollars in infrastructure and logistics to get started. With Filecoin, you can do the same for a few thousand dollars.
Proceed to mining
Deals are the primary function of the Filecoin network, and it represents an agreement between a client and miners for a “storage” contract.
Once the customer decides to have a miner to store based on the available capacity, duration and price required, he secures sufficient funds in a linked portfolio to cover the total cost of the deal. The deal is then published once the mine accepts the storage agreement. By default, all Filecoin miners are set to automatically accept any deal that meets their criteria, although this can be disabled for miners who prefer to organize their deals manually.
After the deal is published, the customer prepares the data for storage and then transfers it to the miner. Upon receiving all the data, the miner fills in the data in a sector, closes it, and begins to provide proofs to the chain. Once the first confirmation is obtained, the customer can make sure the data is stored correctly, and the deal has officially started.
Throughout the deal, the miner provides continuous proofs to the chain. Clients gradually pay with money they previously closed. If there is missing or late evidence, the miner is punished. More information about this can be found in the Runtime, Cut and Penalties section of this page.
At Filecoin, miners earn two different types of rewards for their efforts: storage fees and reward prevention.
Storage fees are the fees that customers pay regularly after reaching a deal, in exchange for storing data. This fee is automatically deposited into the withdrawal portfolio associated with miners while they continue to perform their duties over time, and is locked for a short period upon receipt.
Block rewards are large sums given to miners calculated on a new block. Unlike storage fees, these rewards do not come from a linked customer; Instead, the new FIL “prints” the network as an inflationary and incentive measure for miners to develop the chain. All active miners on the network have a chance to get a block bonus, their chance to be directly proportional to the amount of storage space that is currently being contributed to the network.
Duration of operation, cutting and penalties
“Slashing” is a feature found in most blockchain protocols, and is used to punish miners who fail to provide reliable uptime or act maliciously against the network.
In Filecoin, miners are susceptible to two different types of cut: storage error cut, unanimously reduce error.
Storage Error Reduction is a term used to include a wider range of penalties, including error fees, sector penalties, and termination fees. Miners must pay these penalties if they fail to provide reliability of the sector or decide to leave the network voluntarily.
An error fee is a penalty that a miner incurs for each non-working day. Sector punishment: A penalty incurred by a miner of a disrupted sector for which no error was reported before the WindowPoSt inspection.
The sector will pay an error fee after the penalty of the sector once the error is discovered.
Termination Fee: A penalty that a miner incurs when a sector is voluntary or involuntarily terminated and removed from the network.
Cutting consensus error is the penalty that a miner incurs for committing consensus errors. This punishment applies to miners who have acted maliciously against the network consensus function.
Filecoin miners
Eight of the top 10 Felticoin miners are Chinese investors or companies, according to the blockchain explorer, while more companies are selling cloud mining contracts and distributed file sharing system hardware. CoinDesk’s Wolfe Chao wrote: “China’s craze for Filecoin may have been largely related to the long-standing popularity of crypto mining in the country overall, which is home to about 65% of the computing power on Bitcoin at discretion.”
With Filecoin approaching the launch of the mainnet blocknet — after several delays since the $ 200 million increase in 2017 — Chinese investors are once again speculating strongly about network mining devices and their premium prices.
Since Protocol Labs, the company behind Filecoin, released its “Test Incentives” program on June 9 that was scheduled to start in a week’s time, more than a dozen Chinese companies have started selling cloud mining contracts and hardware — despite important details such as economics Mining incentives on the main network are still endless.
Sales volumes to date for each of these companies can range from half a million to tens of millions of dollars, according to self-reported data on these platforms that CoinDesk has watched and interviews with several mining hardware manufacturers.
Filecoin’s goal is to build a distributed storage network with token rewards to spur storage hosting as a way to drive wider adoption. Protocol Labs launched a test network in December 2019. But the tokens mined in the testing environment so far are not representative of the true silicon coin that can be traded when the main network is turned on. Moreover, the mining incentive economics on testnet do not represent how final block rewards will be available on the main network.
However, data from Blockecoin’s blocknetin testnet explorers show that eight out of 10 miners with the most effective mining force on testnet are currently Chinese miners.
These eight miners have about 15 petabytes (PB) of effective storage mining power, accounting for more than 85% of the total test of 17.9 petable. For the context, 1 petabyte of hard disk storage = 1000 terabytes (terabytes) = 1 million gigabytes (GB).
Filecoin craze in China may be closely related to the long-standing popularity of crypt mining in the country overall, which is home to about 65% of the computing power on Bitcoin by estimation. In addition, there has been a lot of hype in China about foreign exchange mining since 2018, as companies promote all types of devices when the network is still in development.
“Encryption mining has always been popular in China,” said Andy Tien, co-founder of 1475, one of several mining hardware manufacturers in Philquin supported by prominent Chinese video indicators such as Fenbushi and Hashkey Capital.
“Even though the Velikoyen mining process is more technologically sophisticated, the idea of mining using hard drives instead of specialized machines like Bitcoin ASIC may be a lot easier for retailers to understand,” he said.
Meanwhile, according to Feixiaohao, a Chinese service comparable to CoinMarketCap, nearly 50 Chinese crypto exchanges are often somewhat unknown with some of the more well-known exchanges including Gate.io and Biki — have listed trading pairs for Filecoin currency contracts for USDT.
In bitcoin mining, at the current difficulty level, one segment per second (TH / s) fragmentation rate is expected to generate around 0.000008 BTC within 24 hours. The higher the number of TH / s, the greater the number of bitcoins it should be able to produce proportionately. But in Filecoin, the efficient mining force of miners depends on the amount of data stamped on the hard drive, not the total size of the hard drive.
To close data in the hard drive, the Filecoin miner still needs processing power, i.e. CPU or GPU as well as RAM. More powerful processors with improved software can confine data to the hard drive more quickly, so miners can combine more efficient mining energy faster on a given day.
As of this stage, there appears to be no transparent way at the network level for retail investors to see how much of the purchased hard disk drive was purchased which actually represents an effective mining force.
The U.S.-based Labs Protocol was behind Filecoin’s initial coin offer for 2017, which raised an astonishing $ 200 million.
This was in addition to a $ 50 million increase in private investment supported by notable venture capital projects including Sequoia, Anderson Horowitz and Union Square Ventures. CoinDk’s parent company, CoinDk, has also invested in Protocol Labs.
After rounds of delay, Protocol Protocols said in September 2019 that a testnet launch would be available around December 2019 and the main network would be rolled out in the first quarter of 2020.
The test started as promised, but the main network has been delayed again and is now expected to launch in August 2020. What is Filecoin mining process?
Filecoin mainly consists of three parts: the storage market (the chain), the blockecin Filecoin, and the search market (under the chain). Storage and research market in series and series respectively for security and efficiency. For users, the storage frequency is relatively low, and the security requirements are relatively high, so the storage process is placed on the chain. The retrieval frequency is much higher than the storage frequency when there is a certain amount of data. Given the performance problem in processing data on the chain, the retrieval process under the chain is performed. In order to solve the security issue of payment in the retrieval process, Filecoin adopts the micro-payment strategy. In simple terms, the process is to split the document into several copies, and every time the user gets a portion of the data, the corresponding fee is paid. Types of mines corresponding to Filecoin’s two major markets are miners and warehousers, among whom miners are primarily responsible for storing data and block packages, while miners are primarily responsible for data query. After the stable operation of the major Filecoin network in the future, the mining operator will be introduced, who is the main responsible for data maintenance.
In the initial release of Filecoin, the request matching mechanism was not implemented in the storage market and retrieval market, but the takeover mechanism was adopted. The three main parts of Filecoin correspond to three processes, namely the stored procedure, retrieval process, packaging and reward process. The following figure shows the simplified process and the income of the miners:
The Filecoin mining process is much more complicated, and the important factor in determining the previous mining profit is efficient storage. Effective storage is a key feature that distinguishes Filecoin from other decentralized storage projects. In Filecoin’s EC consensus, effective storage is similar to interest in PoS, which determines the likelihood that a miner will get the right to fill, that is, the proportion of miners effectively stored in the entire network is proportional to final mining revenue.
It is also possible to obtain higher effective storage under the same hardware conditions by improving the mining algorithm. However, the current increase in the number of benefits that can be achieved by improving the algorithm is still unknown.
It seeks to promote mining using Filecoin Discover
Filecoin announced Filecoin Discover — a step to encourage miners to join the Filecoin network. According to the company, Filecoin Discover is “an ever-growing catalog of numerous petabytes of public data covering literature, science, art, and history.” Miners interested in sharing can choose which data sets they want to store, and receive that data on a drive at a cost. In exchange for storing this verified data, miners will earn additional Filecoin above the regular block rewards for storing data. Includes the current catalog of open source data sets; ENCODE, 1000 Genomes, Project Gutenberg, Berkley Self-driving data, more projects, and datasets are added every day.
Ian Darrow, Head of Operations at Filecoin, commented on the announcement:
“Over 2.5 quintillion bytes of data are created every day. This data includes 294 billion emails, 500 million tweets and 64 billion messages on social media. But it is also climatology reports, disease tracking maps, connected vehicle coordinates and much more. It is extremely important that we maintain data that will serve as the backbone for future research and discovery”.
Miners who choose to participate in Filecoin Discover may receive hard drives pre-loaded with verified data, as well as setup and maintenance instructions, depending on the company. The Filecoin team will also host the Slack (fil-Discover-support) channel where miners can learn more.
Filecoin got its fair share of obstacles along the way. Last month Filecoin announced a further delay before its main network was officially launched — after years of raising funds.
In late July QEBR (OTC: QEBR) announced that it had ceded ownership of two subsidiaries in order to focus all of the company’s resources on building blockchain-based mining operations.
The QEBR technology team previously announced that it has proven its system as a Filecoin node valid with CPU, GPU, bandwidth and storage compatibility that meets all IPFS guidelines. The QEBR test system is connected to the main Filecoin blockchain and the already mined filecoin coin has already been tested.
“The disclosure of Sheen Boom and Jihye will allow our team to focus only on the upcoming global launch of Filecoin. QEBR branch, Shenzhen DZD Digital Technology Ltd. (“ DZD “), has a strong background in blockchain development, extraction Data, data acquisition, data processing, data technology research. We strongly believe Filecoin has the potential to be a leading blockchain-based cryptocurrency and will make every effort to make QEBR an important player when Mainecoin mainnet will be launched soon”.
IPFS and Filecoin
Filecoin and IPFS are complementary protocols for storing and sharing data in a decentralized network. While users are not required to use Filecoin and IPFS together, the two combined are working to resolve major failures in the current web infrastructure.
IPFS
It is an open source protocol that allows users to store and transmit verifiable data with each other. IPFS users insist on data on the network by installing it on their own device, to a third-party cloud service (known as Pinning Services), or through community-oriented systems where a group of individual IPFS users share resources to ensure the content stays live.
The lack of an integrated catalytic mechanism is the challenge Filecoin hopes to solve by allowing users to catalyze long-term distributed storage at competitive prices through the storage contract market, while maintaining the efficiency and flexibility that the IPFS network provides.
Using IPFS
In IPFS, the data is hosted by the required data installation nodes. For data to persist while the user node is offline, users must either rely on their other peers to install their data voluntarily or use a central install service to store data.
Peer-to-peer reliance caching data may be a good thing as one or multiple organizations share common files on an internal network, or where strong social contracts can be used to ensure continued hosting and preservation of content in the long run. Most users in an IPFS network use an installation service.
Using Filecoin
The last option is to install your data in a decentralized storage market, such as Filecoin. In Filecoin’s structure, customers make regular small payments to store data when a certain availability, while miners earn those payments by constantly checking the integrity of this data, storing it, and ensuring its quick recovery. This allows users to motivate Filecoin miners to ensure that their content will be live when it is needed, a distinct advantage of relying only on other network users as required using IPFS alone.
Filecoin, powered by IPFS
It is important to know that Filecoin is built on top of IPFS. Filecoin aims to be a very integrated and seamless storage market that takes advantage of the basic functions provided by IPFS, they are connected to each other, but can be implemented completely independently of each other. Users do not need to interact with Filecoin in order to use IPFS.
Some advantages of sharing Filecoin with IPFS:
Of all the decentralized storage projects, Filecoin is undoubtedly the most interested, and IPFS has been running stably for two years, fully demonstrating the strength of its core protocol.
Filecoin’s ability to obtain market share from traditional central storage depends on end-user experience and storage price. Currently, most Filecoin nodes are posted in the IDC room. Actual deployment and operation costs are not reduced compared to traditional central cloud storage, and the storage process is more complicated.
PoRep and PoSt, which has a large number of proofs of unknown operation, are required to cause the actual storage cost to be so, in the early days of the release of Filecoin. The actual cost of storing data may be higher than the cost of central cloud storage, but the initial storage node may reduce the storage price in order to obtain block rewards, which may result in the actual storage price lower than traditional central cloud storage.
In the long term, Filecoin still needs to take full advantage of its P2P storage, convert storage devices from specialization to civil use, and improve its algorithms to reduce storage costs without affecting user experience. The storage problem is an important problem to be solved in the blockchain field, so a large number of storage projects were presented at the 19th Web3 Summit. IPFS is an important part of Web3 visibility. Its development will affect the development of Web3 to some extent. Likewise, Web3 development somewhat determines the future of IPFS. Filecoin is an IPFS-based storage class project initiated by IPFS. There is no doubt that he is highly expected.
Resources :
  1. https://www.coindesk.com/filecoin-pushes-back-final-testing-phase-announces-calibration-period-for-miners
  2. https://docs.filecoin.io/mine/#types-of-miners https://www.nasdaq.com/articles/inside-the-craze-for-filecoin-crypto-mining-in-china-2020-07-12؟amp
  3. https://www.prnewswire.com/news-releases/qebr-streamlines-holdings-to-concentrate-on-filecoin-development-and-mining-301098731.html
  4. https://www.crowdfundinsider.com/2020/05/161200-filecoin-seeks-to-boost-mining-with-filecoin-discove
  5. https://zephyrnet.com/filecoin-seeks-to-boost-mining-with-filecoin-discove
  6. https://docs.filecoin.io/introduction/ipfs-and-filecoin/#filecoin-powered-by-ipfs
submitted by CoinEx_Institution to filecoin [link] [comments]

Weekly Update: 2gether has 40k users, $BOMB on Uniswap, Ghost data service, Constellation State of the Union…– 5 Jun - 11 Jun'20

Weekly Update: 2gether has 40k users, $BOMB on Uniswap, Ghost data service, Constellation State of the Union…– 5 Jun - 11 Jun'20
Hey everyone! This is Part IV of VI from our May-June update catchup series (5 Jun - 11 Jun'20):

Yosma's Cheerful Cassowary beat Eva's Bright Beetle in a quick finale to win this week's Parena which had a massive $PAR pot thanks to a generous donation from Tony. Gamer Boy’s “Random Gk” and “Renewal from January” quizzes in Tiproom were fun as always. Plus, there were 10k $PAR in prizes. Cool! Charlotte’s “Mega Trivia” got everyone scratching their heads. CoD Mobile gamers were in for an epic time this week with Tavo hosting a tournament with a 3k $PAR pot in the Parachute War Zone. Two-for-Tuesday slid into the "rap, reggae and reggaeton" mode this week. Click here to listen to the playlist. Thanks Sebastian for setting it up! If you have been around for a while, you’ll know that Clinton’s charity, For Living Independence, does some amazing work. So the next time you shop on Amazon, don’t forget to show some love though AmazonSmile.
Cap and crew made their voices heard in NYC this week in solidarity with George Floyd
Congratulations to 2gether for crossing the 40k user mark this week. A new way for account top ups was introduced as well. This week’s CEO email covers news on the latest UX and the 2GT token. Youtuber Funontheride featured the email in his video. Filippo Angeloni covered the latest updates in his newest video as well. Founder Savador Casquero wrote about crypto staking in an Investing.com article. MakerDAO covered the 2gether card in its blog post on crypto debit cards. Following the XIO dApp update from last week, Citizens brainstormed about the UI this week. Citizens also talked about some of their contrarian beliefs in crypto. Bomb community started a Uniswap rewards program. Voyager raised USD 2.1M through a private placement from investors such as Streamlined Ventures, Susquehanna, Market Rebellion etc. Their stock has seen some enormous growth this year too. CEO Stephen Ehrlich shared his thoughts on the crypto market in a recent Bloomberg article. The team also took inputs from the community on which crypto to list next. John McAfee announced a Ghost cell phone data service to be released in September. Check out how the eSIM will work from the sneak peek video. The list of supported phones is mentioned here. And hope you had good fun in ParJar Gaming while winning some cool $ESH. A new set of upgrades were pushed to the Fantom Wallet. For the latest technical update on the project, click here. This week, I also wrote a Hackernoon article (with my co-author Rohit) exploring projects which had unique variations to Proof-of-Stake for their chain consensus. Among the projects featured were Fantom, COTI and Harmony. Jeff from Uptrennd will be speaking at the LA Blockchain Summit in October this year. The winners of the Blockchain Awards were announced. The newest Opacity release allows expired accounts to be revived within 2 months of expiry.
Fantom, Harmony and COTI take up a tiny but growing slice in the global staking pie
Catch up on the latest District0x weekly update and dev update from here and here respectively. The Q1 2020 report was released as well. The project is still sitting on a healthy crypto asset base of USD 4M+. Hydro team shared a guide to choosing a prepaid debit card program manager. Their PaaS report was also covered by Finovate this week. A new research page for featuring all of Hydro’s fintech research material was released. The successful applicants of the Project Hydro Decentralization Ambassador Program (which started in May) were voted upon this week and 7 DAs were elected. Silent Notary, Ubikiri and IDL integrations were completed this week with Silent Notary now appearing in Applications section of Ubikiri. A roundup of the latest updates was published as well. Sentivate founder Thomas Marchi sat down for an interview with MineYourBiz Monday’s NrdGrl007. Mycro announced that Chaia.io will be hosting a campaign on the Mycro Hunter App soon. SelfKey’s Data Breach compendium was updated this week. And if you’re a Product Designer looking for remote work, don’t forget to check out this opening at SelfKey. What next for Constellation? Watch the Constellation Network State of The Union to find out. Their educational group Startdust Collective made a brand video and a high level explainer article on the HyperGraph Transport Protocol. Pynk is thinking about doing a global crowdfunding campaign as opposed to one that is restricted to certain countries only. In light of this, the Pynk Crowd Wisdom was put to work to find out the best way to go about this.
Results of the Project Hydro DA Elections
Wibson’s latest app update was covered by Cointelegraph and Europe World News. Click here to catch up on this week’s detailed work thread from the Harmony project. A recent Harmony ecosystem is the SmartStake dashboard to check staking stats. Sprout Wallet now supports core utilities of HRC20 tokens. The team sat down for an AMA with Binance India and KuCoin this week. Next week they will be doing another AMA with the larger Binance community. Some insights about the Harmony grants were shared in this week’s community call. Read up on Intellishare founder Raymond Xiong’s thoughts on DAOs which he shared as part of a speaker panel at the 2020 Digital Innovation Project Exchange Conference. The team also published a post on how they aim to solve the DeFi congestion. The TestNet is expected to arrive soon as well. After the latest livestream of DI-RECT’s concert which saw ~10k attendees, GET Protocol announced that they will be facilitating tickets to the follow-up show as well. A recap of the COTI journey was published to mark the one-year anniversary of the project and the occasion was celebrated with a fun trivia. DoYourTip community voted to have liquidity rewards for pooling $DYT on Uniswap.

And with that, it’s a wrap! See you again with another update. Ciao!
submitted by abhijoysarkar to ParachuteToken [link] [comments]

Question Roundup - June 2020

The following questions were asked in our Telegram: t.me/ptokens

Q: What is the use case for pBTC tokens?
A: pBTC and other pTokens (pLTC, pEOS, etc) ensure that DApps can be accessible to anyone using cryptocurrencies, without them having to sell their Bitcoin, LItecoin, EOS, or any blockchain asset that they hold.
With the pTokens DApp, you can deposit your bitcoin and mint pBTC to enable portability to Ethereum and EOS blockchains. This allows you to explore new DApps and DeFi opportunities outside of the Bitcoin blockchain without selling your underlying BTC asset.
With pBTC you can:

Q: What is Crosschain?
A: Crosschain is a term indicating that multiple blockchains are connected and interoperable.

Q: Can I exchange pBTC for WBTC?
A: Yes you can swap for WBTC directly through the Eidoo wallet or with Kyber Network.
Or to move from Bitcoin to WBTC, you can utilize pBTC. First, swap BTC for pBTC via the pTokens DApp. Then swap pBTC for WBTC on Uniswap, utilizing the pBTC/WBTC liquidity pool, or through Kyber Network.

Q: Let's say I can get 6% interest over my pBTC in a DeFi project – how does it work when I redeem my BTC?
A: If you peg-in 1 BTC in pTokens, 1 pBTC is minted. Suppose that after one year you earn 6% on your pBTC and want to redeem your underlying asset. You will peg-out 1.06 pBTC and you will receive 1.06 BTC.

Q: What are the contract addresses of pBTC?
A: pBTC on ETH: https://etherscan.io/token/0x5228a22e72ccc52d415ecfd199f99d0665e7733b
pBTC EOS: https://bloks.io/account/btc.ptokens

Q: What projects have integrated pTokens?
A: We’ve integrated with a range of liquidity providers, DEXs, and frameworks such as dMEX, Loopring, Kyber Network, Bancor, and Equilibrium.
There’s also support for pBTC on popular DEX aggregators like 1inchExchange, Dex.ag, and Paraswap, as well as on wallets like Argent, MyEtherWallet, Trust Wallet, and Eidoo.
You can find our full (and growing) list of integrations at: ptokens.io/integrations

Q: Do you have any new pTokens bridges planned? Which are live now?
A: pBTC is currently on mainnet, both on Ethereum and EOS. And on testnet, pTokens currently has pLTC on ETH and pEOS on ETH. We are working on a few more pTokens bridges that will be released in the coming months, but going forward the pNetwork DAO will decide which pTokens assets and bridges are implemented.
You can see our planned assets here under “assets supported.”

Q: What phase is pTokens in, and when will it start the next phase?
A: p.Network is currently in phase 0 of its progressive decentralization roadmap. This means that pTokens are currently running on a single enclave, trust minimized, while future phases will be decentralized and trustless. The pNetwork DAO will launch in the coming weeks, and Phase1 will launch in Q3.
For more on the pNetwork roadmap, visit: https://p.network/project#roadmap

Q: Is there any concern for vulnerabilities with the use of a TEE given the history of SGX?
A: In our current phase0, we are not decentralized, but are utilizing a stronger-than-SGX TEE (strongbox). In phase1, we’ll be using multiTEE (no point of failure in a single tee)+MPC.

Q: Are there any minting fees?
A: In our current phase0, there are no peg-in/-out fees, as we subsidize the cost. In phase1 the fee will be chosen by the DAO and enforced by validators (the fee will be distributed among them as a reward for their work). At that point you can expect the fee to be similar to the ones applied by competing projects, which is normally between 0.1 and 0.2% (conceptually similar to the "trading fee" being applied by exchanges).

Q: Why are two pTokens BTC listed on Crossmarketcap? (11 e 13)?
A: Crossmarketcap shows data for several chains so they show two pBTC tokens: pBTC-on-eth and pBTC-on-eos.

Q: What is the difference between pTokens.io and p.Network?
A: pTokens.io is the project to unchain assets by creating 1:1 pTokenized assets (like pBTC) to move liquidity from one blockchain to another. It's integrated into various DeFi DApps and platforms across multiple blockchains. p.Network is the governance layer that supports and secures pTokens, and other projects, via a network of validators and a DAO.

Q: What is PNT? What happened to EDO?
A: The pNetwork Token (PNT) is the governance token for the upcoming p.Network, the decentralized network powering pTokens. Thanks to a collaborative effort between Eidoo and pTokens, the EDO token was upgraded and effectively transformed into PNT on June 18. On this day, EDO holders received an equal amount of PNT tokens in their Ethereum wallets, with leading exchanges listing PNT. EDO is no longer supported, as the value and utility of EDO was transferred to PNT.
As a governance token, PNT will be used for staking, voting and earning interest within the p.Network. PNT is available on a growing list of exchanges, including: Binance, Bitfinex, HitBTC, Kyber Network and Loopring. For more on the token upgrade, visit: https://medium.com/provable/introducing-the-pnetwork-pnt-2354f7ab06f

Q: What is the reason behind burning 28 million+ edo?
A: This is a step to reduce company held tokens so ownership is spread more equitably to the community when we move to the introduction of a community-governed DAO system.

Q: How much PNT does the team have now?
A: The team has 13M PNT locked, they unlock after 1 and 2 years. The token economy is outlined in the pNetwork deck on p.network/learn.

Q: Is there a public audit report?
A: The audit report for pBTC on ETH is available here. And the audit report for pBTC on EOS is here.

Q: Will the burning of PNT occur, similar to EDO burning for the Eidoo core services?
A: Yes. PNT extends the EDO token economy with p.Network so all Eidoo core services will continue as planned. Currently, 5M tokens are locked because of the previous Eidoo staking initiatives and burning happens on a daily basis (edo.watch).

Q: What is the contract address of PNT? Where can I find the total supply and circulating supply?
A: The contract addresses for PNT is: https://etherscan.io/address/0x89Ab32156e46F46D02ade3FEcbe5Fc4243B9AAeD
The total supply is approx 59.65M EDO: https://etherscan.io/token/0xced4e93198734ddaff8492d525bd258d49eb388e
The circulating supply is approximately 34M EDO as described on page #22 in our deck.
For more on the circulating supply, visit: https://www.coingecko.com/en/coins/pnetwork

Q: I see another project on Coingecko with PNT called Penta network – What is it?
A: We are not associated with Penta. Please be mindful to check the full name of the asset before interacting with it. For example, on HitBTC, Penta is listed as PNT, and pNetwork Token is listed as XPNT, but this is the only exchange where this occurs.

Q: Is PNT listed on any exchanges?
A: PNT is available on a growing list of exchanges, including: Binance, Bitfinex, HitBTC, Kyber Network and Loopring. We will continue to update our blog as more are added.
Coingecko also reports the exchanges where the trading of the pNetwork Token is active: https://www.coingecko.com/en/coins/pnetwork#markets.

Q: Why is PNT not supported on OKex?
A: Given the very small number of EDO tokens deposited on OKex we have decided not to list PNT there.

Q: What is the minimum amount of PNT required to stake
A: No minimum is required.

Q: How much is required to run a node?
A: Validators must stake 200k PNT. As an incentive, they would be able to earn 63% interest over two years - 42% the first year, and 21% the second. The pNetwork litepaper goes into more details on validators, PNT and token economics.

Q: How can you guarantee those interest rates?
A: They will be guaranteed by an inflation mechanism. The supply of PNT is just below 60 million tokens after launch. During the first stages of the pNetwork, an economic incentive is also introduced to the system to encourage users to actively participate within the DAO. In these first two years, all those who stake PNT will see their tokens grow with an overall interest rate of 63% over two years. Up to 28,350,000 PNT tokens are dedicated to this initiative, which are generated through an inflation mechanism.

Q: Where can I find community questions from the previous months?
May 2020
April 2020
March 2020
submitted by robwitt to pTokens [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

⚡ Lightning Network Megathread ⚡

Last updated 2018-01-29
This post is a collaboration with the Bitcoin community to create a one-stop source for Lightning Network information.
There are still questions in the FAQ that are unanswered, if you know the answer and can provide a source please do so!

⚡What is the Lightning Network? ⚡

Explanations:

Image Explanations:

Specifications / White Papers

Videos

Lightning Network Experts on Reddit

  • starkbot - (Elizabeth Stark - Lightning Labs)
  • roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • stile65 - (Alex Akselrod - Lightning Labs)
  • cfromknecht - (Conner Fromknecht - Lightning Labs)
  • RustyReddit - (Rusty Russell - Blockstream)
  • cdecker - (Christian Decker - Blockstream)
  • Dryja - (Tadge Dryja - Digital Currency Initiative)
  • josephpoon - (Joseph Poon)
  • fdrn - (Fabrice Drouin - ACINQ )
  • pmpadiou - (Pierre-Marie Padiou - ACINQ)

Lightning Network Experts on Twitter

  • @starkness - (Elizabeth Stark - Lightning Labs)
  • @roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • @stile65 - (Alex Akselrod - Lightning Labs)
  • @bitconner - (Conner Fromknecht - Lightning Labs)
  • @johanth - (Johan Halseth - Lightning Labs)
  • @bvu - (Bryan Vu - Lightning Labs)
  • @rusty_twit - (Rusty Russell - Blockstream)
  • @snyke - (Christian Decker - Blockstream)
  • @JackMallers - (Jack Mallers - Zap)
  • @tdryja - (Tadge Dryja - Digital Currency Initiative)
  • @jcp - (Joseph Poon)
  • @alexbosworth - (Alex Bosworth - yalls.org)

Medium Posts

Learning Resources

Books

Desktop Interfaces

Web Interfaces

Tutorials and resources

Lightning on Testnet

Lightning Wallets

Place a testnet transaction

Altcoin Trading using Lightning

  • ZigZag - Disclaimer You must trust ZigZag to send to Target Address

Lightning on Mainnet

Warning - Testing should be done on Testnet

Atomic Swaps

Developer Documentation and Resources

Lightning implementations

  • LND - Lightning Network Daemon (Golang)
  • eclair - A Scala implementation of the Lightning Network (Scala)
  • c-lightning - A Lightning Network implementation in C
  • lit - Lightning Network node software (Golang)
  • lightning-onion - Onion Routed Micropayments for the Lightning Network (Golang)
  • lightning-integration - Lightning Integration Testing Framework
  • ptarmigan - C++ BOLT-Compliant Lightning Network Implementation [Incomplete]

Libraries

Lightning Network Visualizers/Explorers

Testnet

Mainnet

Payment Processors

  • BTCPay - Next stable version will include Lightning Network

Community

Slack

IRC

Slack Channel

Discord Channel

Miscellaneous

⚡ Lightning FAQs ⚡

If you can answer please PM me and include source if possible. Feel free to help keep these answers up to date and as brief but correct as possible
Is Lightning Bitcoin?
Yes. You pick a peer and after some setup, create a bitcoin transaction to fund the lightning channel; it’ll then take another transaction to close it and release your funds. You and your peer always hold a bitcoin transaction to get your funds whenever you want: just broadcast to the blockchain like normal. In other words, you and your peer create a shared account, and then use Lightning to securely negotiate who gets how much from that shared account, without waiting for the bitcoin blockchain.
Is the Lightning Network open source?
Yes, Lightning is open source. Anyone can review the code (in the same way as the bitcoin code)
Who owns and controls the Lightning Network?
Similar to the bitcoin network, no one will ever own or control the Lightning Network. The code is open source and free for anyone to download and review. Anyone can run a node and be part of the network.
I’ve heard that Lightning transactions are happening “off-chain”…Does that mean that my bitcoin will be removed from the blockchain?
No, your bitcoin will never leave the blockchain. Instead your bitcoin will be held in a multi-signature address as long as your channel stays open. When the channel is closed; the final transaction will be added to the blockchain. “Off-chain” is not a perfect term, but it is used due to the fact that the transfer of ownership is no longer reflected on the blockchain until the channel is closed.
Do I need a constant connection to run a lightning node?
Not necessarily,
Example: A and B have a channel. 1 BTC each. A sends B 0.5 BTC. B sends back 0.25 BTC. Balance should be A = 0.75, B = 1.25. If A gets disconnected, B can publish the first Tx where the balance was A = 0.5 and B = 1.5. If the node B does in fact attempt to cheat by publishing an old state (such as the A=0.5 and B=1.5 state), this cheat can then be detected on-chain and used to steal the cheaters funds, i.e., A can see the closing transaction, notice it's an old one and grab all funds in the channel (A=2, B=0). The time that A has in order to react to the cheating counterparty is given by the CheckLockTimeVerify (CLTV) in the cheating transaction, which is adjustable. So if A foresees that it'll be able to check in about once every 24 hours it'll require that the CLTV is at least that large, if it's once a week then that's fine too. You definitely do not need to be online and watching the chain 24/7, just make sure to check in once in a while before the CLTV expires. Alternatively you can outsource the watch duties, in order to keep the CLTV timeouts low. This can be achieved both with trusted third parties or untrusted ones (watchtowers). In the case of a unilateral close, e.g., you just go offline and never come back, the other endpoint will have to wait for that timeout to expire to get its funds back. So peers might not accept channels with extremely high CLTV timeouts. -- Source
What Are Lightning’s Advantages?
Tiny payments are possible: since fees are proportional to the payment amount, you can pay a fraction of a cent; accounting is even done in thousandths of a satoshi. Payments are settled instantly: the money is sent in the time it takes to cross the network to your destination and back, typically a fraction of a second.
Does Lightning require Segregated Witness?
Yes, but not in theory. You could make a poorer lightning network without it, which has higher risks when establishing channels (you might have to wait a month if things go wrong!), has limited channel lifetime, longer minimum payment expiry times on each hop, is less efficient and has less robust outsourcing. The entire spec as written today assumes segregated witness, as it solves all these problems.
Can I Send Funds From Lightning to a Normal Bitcoin Address?
No, for now. For the first version of the protocol, if you wanted to send a normal bitcoin transaction using your channel, you have to close it, send the funds, then reopen the channel (3 transactions). In future versions, you and your peer would agree to spend out of your lightning channel funds just like a normal bitcoin payment, allowing you to use your lightning wallet like a normal bitcoin wallet.
Can I Make Money Running a Lightning Node?
Not really. Anyone can set up a node, and so it’s a race to the bottom on fees. In practice, we may see the network use a nominal fee and not change very much, which only provides an incremental incentive to route on a node you’re going to use yourself, and not enough to run one merely for fees. Having clients use criteria other than fees (e.g. randomness, diversity) in route selection will also help this.
What is the release date for Lightning on Mainnet?
Lightning is already being tested on the Mainnet Twitter Link but as for a specific date, Jameson Lopp says it best
Would there be any KYC/AML issues with certain nodes?
Nope, because there is no custody ever involved. It's just like forwarding packets. -- Source
What is the delay time for the recipient of a transaction receiving confirmation?
Furthermore, the Lightning Network scales not with the transaction throughput of the underlying blockchain, but with modern data processing and latency limits - payments can be made nearly as quickly as packets can be sent. -- Source
How does the lightning network prevent centralization?
Bitcoin Stack Exchange Answer
What are Channel Factories and how do they work?
Bitcoin Stack Exchange Answer
How does the Lightning network work in simple terms?
Bitcoin Stack Exchange Answer
How are paths found in Lightning Network?
Bitcoin Stack Exchange Answer
How would the lightning network work between exchanges?
Each exchange will get to decide and need to implement the software into their system, but some ideas have been outlined here: Google Doc - Lightning Exchanges
Note that by virtue of the usual benefits of cost-less, instantaneous transactions, lightning will make arbitrage between exchanges much more efficient and thus lead to consistent pricing across exchange that adopt it. -- Source
How do lightning nodes find other lightning nodes?
Stack Exchange Answer
Does every user need to store the state of the complete Lightning Network?
According to Rusty's calculations we should be able to store 1 million nodes in about 100 MB, so that should work even for mobile phones. Beyond that we have some proposals ready to lighten the load on endpoints, but we'll cross that bridge when we get there. -- Source
Would I need to download the complete state every time I open the App and make a payment?
No you'd remember the information from the last time you started the app and only sync the differences. This is not yet implemented, but it shouldn't be too hard to get a preliminary protocol working if that turns out to be a problem. -- Source
What needs to happen for the Lightning Network to be deployed and what can I do as a user to help?
Lightning is based on participants in the network running lightning node software that enables them to interact with other nodes. This does not require being a full bitcoin node, but you will have to run "lnd", "eclair", or one of the other node softwares listed above.
All lightning wallets have node software integrated into them, because that is necessary to create payment channels and conduct payments on the network, but you can also intentionally run lnd or similar for public benefit - e.g. you can hold open payment channels or channels with higher volume, than you need for your own transactions. You would be compensated in modest fees by those who transact across your node with multi-hop payments. -- Source
Is there anyway for someone who isn't a developer to meaningfully contribute?
Sure, you can help write up educational material. You can learn and read more about the tech at http://dev.lightning.community/resources. You can test the various desktop and mobile apps out there (Lightning Desktop, Zap, Eclair apps). -- Source
Do I need to be a miner to be a Lightning Network node?
No -- Source
Do I need to run a full Bitcoin node to run a lightning node?
lit doesn't depend on having your own full node -- it automatically connects to full nodes on the network. -- Source
LND uses a light client mode, so it doesn't require a full node. The name of the light client it uses is called neutrino
How does the lightning network stop "Cheating" (Someone broadcasting an old transaction)?
Upon opening a channel, the two endpoints first agree on a reserve value, below which the channel balance may not drop. This is to make sure that both endpoints always have some skin in the game as rustyreddit puts it :-)
For a cheat to become worth it, the opponent has to be absolutely sure that you cannot retaliate against him during the timeout. So he has to make sure you never ever get network connectivity during that time. Having someone else also watching for channel closures and notifying you, or releasing a canned retaliation, makes this even harder for the attacker. This is because if he misjudged you being truly offline you can retaliate by grabbing all of its funds. Spotty connections, DDoS, and similar will not provide the attacker the necessary guarantees to make cheating worthwhile. Any form of uncertainty about your online status acts as a deterrent to the other endpoint. -- Source
How many times would someone need to open and close their lightning channels?
You typically want to have more than one channel open at any given time for redundancy's sake. And we imagine open and close will probably be automated for the most part. In fact we already have a feature in LND called autopilot that can automatically open channels for a user.
Frequency will depend whether the funds are needed on-chain or more useful on LN. -- Source
Will the lightning network reduce BTC Liquidity due to "locking-up" funds in channels?
Stack Exchange Answer
Can the Lightning Network work on any other cryptocurrency? How?
Stack Exchange Answer
When setting up a Lightning Network Node are fees set for the entire node, or each channel when opened?
You don't really set up a "node" in the sense that anyone with more than one channel can automatically be a node and route payments. Fees on LN can be set by the node, and can change dynamically on the network. -- Source
Can Lightning routing fees be changed dynamically, without closing channels?
Yes but it has to be implemented in the Lightning software being used. -- Source
How can you make sure that there will be routes with large enough balances to handle transactions?
You won't have to do anything. With autopilot enabled, it'll automatically open and close channels based on the availability of the network. -- Source
How does the Lightning Network stop flooding nodes (DDoS) with micro transactions? Is this even an issue?
Stack Exchange Answer

Unanswered Questions

How do on-chain fees work when opening and closing channels? Who pays the fee?
How does the Lightning Network work for mobile users?
What are the best practices for securing a lightning node?
What is a lightning "hub"?
How does lightning handle cross chain (Atomic) swaps?

Special Thanks and Notes

  • Many links found from awesome-lightning-network github
  • Everyone who submitted a question or concern!
  • I'm continuing to format for an easier Mobile experience!
submitted by codedaway to Bitcoin [link] [comments]

Trading On DueDEX  Get A Win At 25x  Bitcoin Technical Analysis Ravencoin Asset Creation on Testnet How to get free Testnet Ether? [Tutorial] How to use Auctionity Block Explorer I Lived Using Only BITCOIN for 24 hours... - YouTube

Yes, in bitcoin an address begins with "1" or "3", in testnet bitcoin an address begins with "m" or "2". In the case of Ethereum both addresses can be used, but you can't transfer ether from Rinkeby to the real network. The same for Eos, you can have a testnet account only in testnet and not in mainnet and viceversa. BSV Testnet Explorer Auto refreshed every 30 secs. Network Summary. Hashrate . 127.329 TH/s. Unconfirmed Transactions. 2 tx (4.06 KB) Difficulty. 17.29 x 10 6. Exchange Rate -Chainwork. 3.44 x 10 21 hashes. Tools. Node Status. Summary of this node: version, network, uptime, etc. Peers. Detailed info about the peers connected to this node. Browse Blocks. Browse all blocks in the blockchain ... Bitcoin explorer. 1 864 484 19. Blocks; Tools; Statistics; Developers; Last block. 1 864 484. Time from last block. 00 hours. 02 minutes. 44 seconds. 19 Pool transactions. 1. ś/vByte. Best fee. Bitcoin testnet faucet. tBTC 1 request per 5 minutes Onetime limit 0.01 tBTC Get test coins! ... Height Age Transactions Total Sent Total Fees Block Size (in bytes) 1864748: 2020-10-26T02:32:54.263Z: 24: 21.646 BTC: 0.001 BTC: 4,803: 1864747: 2020-10-26T02:28:42.842Z 00000000000163a12b8eba952d11203b0892023b3a828f41682c5ad6b38eb8be Time: 2020-09-20 03:05:57

[index] [50214] [4887] [2487] [5643] [23911] [30362] [39939] [16074] [2235] [20327]

Trading On DueDEX Get A Win At 25x Bitcoin Technical Analysis

I Survived Living Off Only BITCOIN for 24 hours and it didn't exactly go as expected. Is it possible to live for a day using cryptocurrency? Inspired from Ye... Open Source Live and Testnet Block Explorer https://mousexplore.com GitHub Repository: https://github.com/norestlabs/mousexplore Working on a blockchain pr... Ravencoin Testnet Faucet and Block Explorer https://testnet.ravencoin.network/ Nothing on this channel is financial advice. My Mining Rig Parts Motherboard: https://amzn.to/2rwd5pf Processor ... L'implementazione Lighning Network su Bitcoin è disponibile sulla rete pubblica testnet, ora si possono avere transazioni economiche e veloci e pagarci il caffé! Vediamo come funziona ... Eric's back! Please watch: "Vat19 Make Me Laugh Challenge #11" https://www.youtube.com/watch?v=kogtbV1aGPI --~-- We picked out our favorite items and you guy...

#