Bitcoind – Commands, RPC Protocol, Install Server ...

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

https://preview.redd.it/rqt2dldyg8e51.jpg?width=1044&format=pjpg&auto=webp&s=777ae9d4fbbb54c3540682b72700fc4ba3de0a44
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.

Solutions

Syscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
  1. Distribution, burns and user-to-user transfers of Reddit Points are entirely carried out on the Syscoin network. This full-on approach to utilizing the Syscoin network provides the most scalability and transaction cost benefits of these scenarios. The tradeoff here is distribution and subscription handling likely migrating away from smart contracts into the application layer.
  2. The Reddit Community Points ecosystem can continue to use existing smart contracts as they are used today on the Ethereum mainchain. Users migrate a portion of their tokens to Syscoin, the scaling network, to gain much lower fees, scalability, and a proven base layer, without sacrificing sovereign ownership. They would use Syscoin for user-to-user transfers. Tips redeemable in ten seconds or less, a high-throughput relay network, and onchain settlement at a block target of 60 seconds.
  3. Integration between Matic Network and Syscoin Platform - similar to Syscoin’s current integration with Ethereum - will provide Reddit Community Points with EVM scalability (including the Memberships ERC777 operator) on the Matic side, and performant simple value transfers, robust decentralized security, and sovereign store-of-value on the Syscoin side. It’s “the best of both worlds”. The trade-off is more complex interoperability.

Syscoin + Matic Integration

Matic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.

Proving Performance & Cost Savings

Our POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
612722: https://sys1.bcfn.ca/block/6d47796d043bb4c508d29123e6ae81b051f5e0aaef849f253c8f3a6942a022ce
612723: https://sys1.bcfn.ca/block/8e2077f743461b90f80b4bef502f564933a8e04de97972901f3d65cfadcf1faf
612724: https://sys1.bcfn.ca/block/205436d25b1b499fce44c29567c5c807beaca915b83cc9f3c35b0d76dbb11f6e
612725: https://sys1.bcfn.ca/block/776d1b1a0f90f655a6bbdf559ff5072459cbdc5682d7615ff4b78c00babdc237
612726: https://sys1.bcfn.ca/block/de4df0994253742a1ac8ac9eec8d2a8c8b0a6d72c53d6f3caa29bb6c171b0a6b
612727: https://sys1.bcfn.ca/block/e5e167c52a9decb313fbaadf49a5e34cb490f8084f642a850385476d4ef10d70
612728: https://sys1.bcfn.ca/block/ab64d989edc71890e7b5b8491c20e9a27520dc45a5f7c776d3dae79057f59fe7
612729: https://sys1.bcfn.ca/block/5e8b7ecd0e36f99d07e4ea6e135fc952bf7ec30164ab6f4d1e98b0f2d405df6d
612730: https://sys1.bcfn.ca/block/d395df3d31dde60bbb0bece6bd5b358297da878f0beb96be389e5f0e043580a3
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.

Cost Savings

Total cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.

Tools, Infrastructure & Documentation

Syscoin Bridge

Mainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
  • Any Standard ERC-20 token to be moved from Ethereum to the Syscoin blockchain as a Syscoin Platform Token (SPT), and back to Ethereum
  • Any SPT to be moved from Syscoin to the Ethereum blockchain as an ERC-20 token, and back to Syscoin

Benefits

  • Permissionless
  • No counterparties involved
  • No trading mechanisms involved
  • No third-party liquidity providers required
  • Cross-chain Fractional Supply - 2-way peg - Token supply maintained globally
  • ERC-20s gain vastly improved transactionality with the Syscoin Token Platform, along with the security of bitcoin-core-compliant PoW.
  • SPTs gain access to all the tooling, applications and capabilities of Ethereum for ERC-20, including smart contracts.
https://preview.redd.it/l8t2m8ldh8e51.png?width=1180&format=png&auto=webp&s=b0a955a0181746dc79aff718bd0bf607d3c3aa23
https://preview.redd.it/26htnxzfh8e51.png?width=1180&format=png&auto=webp&s=d0383d3c2ee836c9f60b57eca35542e9545f741d

Source code

https://github.com/syscoin/?q=sysethereum
Main Subprojects

API

Tools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.

Documentation

Syscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence

Trade-off

The Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.

Cost

Ethereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.

Z-DAG

Zero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).

Benefits

  • Unique fee-market that is more efficient for microtransaction redemption and settlement
  • Uses decentralized means to enable tokens with value transfer scalability that is comparable or exceeds that of credit card networks
  • Provides high throughput and secure fulfillment even if blocks are full
  • Probabilistic and interactive
  • 99.9999% security assurance within 10 seconds
  • Can serve payment channels as a resilience fallback that is faster and lower-cost than falling-back directly to a blockchain
  • Each Z-DAG transaction also settles onchain through Syscoin Core at 60-second block target using SHA-256 Proof of Work consensus
https://preview.redd.it/pgbx84jih8e51.png?width=1614&format=png&auto=webp&s=5f631d42a33dc698365eb8dd184b6d442def6640

Source code

https://github.com/syscoin/syscoin

API

Syscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.

Documentation

Z-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana

Trade-off

Z-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.

Syscoin Specs

Syscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
  • 16MB block bandwidth per minute assuming segwit witness carrying transactions, and transactions ~200 bytes on average
  • SHA256 merge mined with Bitcoin
  • UTXO asset layer, with base Syscoin layer sharing identical security policies as Bitcoin Core
  • Z-DAG on asset layer, bridge to Ethereum on asset layer
  • On-chain scaling with prospect of enabling enterprise grade reliable trustless payment processing with on/offchain hybrid solution
  • Focus only on Simple Value Transfers. MVP of blockchain consensus footprint is balances and ownership of them. Everything else can reduce data availability in exchange for scale (Ethereum 2.0 model). We leave that to other designs, we focus on transfers.
  • Future integrations of MAST/Taproot to get more complex value transfers without trading off trustlessness or decentralization.
  • Zero-knowledge Proofs are a cryptographic new frontier. We are dabbling here to generalize the concept of bridging and also verify the state of a chain efficiently. We also apply it in our Digital Identity projects at Blockchain Foundry (a publicly traded company which develops Syscoin softwares for clients). We are also looking to integrate privacy preserving payment channels for off-chain payments through zkSNARK hub & spoke design which does not suffer from the HTLC attack vectors evident on LN. Much of the issues plaguing Lightning Network can be resolved using a zkSNARK design whilst also providing the ability to do a multi-asset payment channel system. Currently we found a showstopper attack (American Call Option) on LN if we were to use multiple-assets. This would not exist in a system such as this.

Wallets

Web3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
Syscoin-Qt

Explorers

Mainnet: https://sys1.bcfn.ca (Blockbook)
Testnet: https://explorer-testnet.blockchainfoundry.co

Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!

submitted by sidhujag to ethereum [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Bisq not connecting to local bitcoind

Hi, I run Bisq 1.1.7 (and before it's predecessor with the same problem) on my linux box, and I have problems connecting to my local bitcoind. The log says:
Oct-12 21:33:59.240 [PeerGroup Thread] INFO o.b.c.PeerGroup: Attempting connection to [127.0.1.1]:8333 (0 connected, 1 pending, 1 max)
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.n.NioClientManager: Connected to /127.0.1.1:8333
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: Announcing to /127.0.1.1:8333 as: /bitcoinj:0.14.7.bisq.1-SNAPSHOT/Bisq:1.1.7/
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: [127.0.1.1]:8333: Got version=70015, subVer='/Satoshi:0.18.1/', services=0x1037, time=2019-10-12 21:33:59, blocks=599090
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: New peer (1 connected, 0 pending, 1 max)
Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.PeerGroup: Setting download peer: [127.0.1.1]:8333
Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.l.DownloadProgressTracker: Chain download switched to [127.0.1.1]:8333
Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: Peer died (0 connected, 0 pending, 1 max)
Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: Download peer died. Picking a new one.
Oct-12 21:33:59.288 [NioClientManager] INFO o.b.c.PeerGroup: Unsetting download peer: [127.0.1.1]:8333
Oct-12 21:33:59.288 [PeerGroup Thread] INFO o.b.c.PeerGroup: Waiting 1000 msec before next connect attempt to [127.0.0.1]:8333

The GUI shows the "connected peer" flickering on and off, the status line on the bottom shows "Bitcoin network peers: [0/1]" flickering between 0 and 1, and the radiobuttons for selecting a bitcoind greyed out, so I can't edit anything in the GUI. I tried the --rpcXXXX commandline options with no change. My node is fully synced and not pruned.
netstat shows:
tcp 0 0 127.0.0.1:83320.0.0.0:* LISTEN 8542/bitcoin-qt
tcp 0 0 0.0.0.0:83330.0.0.0:* LISTEN 8542/bitcoin-qt
with 8332 being the rpc port.
Any ideas?
submitted by kbdwarrior to bisq [link] [comments]

Dogecoin 1.5.1 Released - Upgrade Now!

We’re happy to announce the release of Dogecoin version 1.5.1!
This release incorporates a range of updates from community contributors, some much needed bug fixes, plus some cool treats brought down-stream from the recent Bitcoin 0.9 release candidate.
Thanks to everyone who helped make this release possible, the entire community appreciates it. We recommend all users update to the latest version and please report any issues you may encounter. As always, backup your wallet.dat file before updating (just to be safe).
Downloads: Windows Installer Windows Archive Mac OS X App
Release highlights: - Switched to Boost 1.55 to fix network connectivity issues on Windows - Removal of reliance on IRC for discovering nodes - Support for URL protocol, eg. dogecoin:addr?amount=xxx&(see Bitcoin’s implementation) - Ability to automatically look up transactions on Dogechain from your client - Working Windows setup script and installer - Opt-in debug logging via -debuglog (to save disk space and stop constant writing) - Fixed Mac Splashscreen’s greedy desktop behavior - Reimplemented testnet, fixing RPC crash due to no genesis block being present - Allow user to load any wallet from data directory specified using -wallet=mywallet.dat - Updated to LevelDB 1.15 to address blockchain database corruption issues - Allow user to send change only to specified address(es) using -change= (one -change parameter per address) - Fixed RPC difficulty look up
Troubleshooting
If anyone experiences issues, delete all 1.4 data (apart from your backed up wallet.dat file) and do a fresh 1.5.1 install.
Enjoy!
submitted by Laika1954 to dogecoin [link] [comments]

I Am Creating A New Bitcoin Core GUI Header

Hey folks,
I have begun work to create a new Bitcoin GUI header. I am doing this for several reasons:
What will CBitcoin (the new GUI header) be?
CBitcoin will be a new GUI header as mentioned above. Among some things, it will support SegWit, it'll combine a GUI and command prompt into one single program and once LN is more developed, it'll integrate that as well.
You can find the project on my website: http://cowlite.nl/cbitcoin.php
and on Github: https://github.com/WJongkind/CBitcoin
During the development of CBitcoin, a strong and easy-to-use framework will be written in Java for interaction with the Bitcoin Network, based on the Bitcoin Core's bitcoind and it's JSON RPC API. Eventually it might be decided that this framework will become a entire project on it's own, but we are not that far yet.
You can read more details about the project on my website: http://cowlite.nl/cbitcoin.php. The entire project is open-source and will remain that way for obvious reasons: the software will be trusted, people can contribute to the code and people can borrow code for their own projects.
Looking for contributors
Currently, I am the only developer of the software. I do this in my spare time as a hobby and I do not earn any form of payment for it (however, people do have the option to donate). I am sure I could write the software entirely myself, though that would probably take a significant amount of time. Therefore I am asking any programming enthusiasts out there that have spare time to lend a hand. On the GitHub page & on my website there are instructions on how you can become part of the project. Donations will be split up amongst all contributors.
submitted by ImJustACowLol to Bitcoin [link] [comments]

Dogecoin is broken. Merry christmas!

So one downside of this particular copy/paste coin: it's very cheap to bloat the blockchain. Tweaking the money supply without tweaking the minimum transaction size or transaction fee means that it cost about $0.000001 per gigabyte, or less than $1 to make it too big for anyone to download. Someone check my math on this, I'm using 0.0001 as the tx fee and 0.00000001 * ~2500 as the output amounts.
It took a dumb college kid an hour of work to make a script that adds 1gb to the dogechain every few days. This is using the QT client and shitty sleep() synchronization (how do you pass the minconf arg with jsonrpc? anyone?). I'm sure someone with another hour and more bitcoin RPC knowledge could put dogecoind on a few AWS instances and make it so the blockchain doesn't fit on an average hard drive in less than a day.
I didn't give a shit until I read about some poor schmuck investing 1.5btc into this. You guys are straight up irresponsible for promoting / encouraging that.
The only solution I can think of is to raise the transaction fee significantly. Something like 10 doge should be enough. Fortunately there's no effective way to short cryptocurrencies yet, otherwise you wouldn't be able to make it high enough. Either that, or actually innovate (wow!) by implementing a rotating blockchain or something.
The script:
NEVERMIND PEOPLE GOT MAD THAT I POSTED IT
(this jsonrpc version: https://github.com/jgarzik/python-bitcoinrpc )
"addrs.txt" is generated with:
./vanitygen -k -X 30 D | awk '(NR + 1) % 3 == 0' | sed -e 's/^Address: //' >> ../../scripts/addrs.txt 
Check out the transaction: http://dogechain.info/tx/856400286a22663580b6ff30e63dc516fd6a7b38f66490bed177ea1e51a13d7b
Anyway, I'm gonna stop running this because I have nothing to gain and don't want to be a dick. But seriously, stop promoting dogecoin until you guys figure this out.
edit: formatting
edit 2: If anyone is actually planning on running this, please do us a favor and attack Megacoin or Quark or Worldcoin instead. Those are scamcoins that aren't even claiming to be just for fun. At least dogecoin has tremendous educational value.
submitted by dogecoinsavior to dogecoin [link] [comments]

[ELI5] Extracting Privkeys from QT/Core

We have a constant stream of people coming back after abandoning Dogecoin and the sub in 2014 when the price fell. These people all have old versions of QT and are now basically trying to recover their coins, presumably to cash out and abandon us again. This is causing strain for the network, as far more people are trying to leech blocks than seed them.
The thing is, none of this is necessary. Especially if you're just going to dump coins. With resources such as https://coinb.in/#settings all you need are your private keys, and you can create, sign and broadcast transactions yourself. No client required, let alone one as resource-hungry as QT.

"So, how do I get my keys?"

First of all, lets talk about data management. The overwhelming majority of coins are not lost through theft, especially direct theft of wallets (as distinct from wholesale thefts/scams/implosions like Moolah, GAW, MtGox, Cryptsy, and even our own beloved Dogetipbot). Most coins are lost because people forget about their wallets and do silly things like reformat hard drives, lose passwords and so on.
So, everyone should have a wallet list. Here is a sample bit of HTML that gives you a page with two columns of wallets, one for local wallets you would withdraw coins to, the other the third-party wallets you would deposit coins to third parties through (do note that many services use temporary addresses generated for deposits which expire after 24h or so). A page like this is how I manage my 100+ wallets, and I have copies on my network and hidden online. Such a page makes it easy to at least keep track of all your wallets, for a trivial amount of work to set up.
 
 Sample - Twitter Fr DFXXz9gq3WkgJaHn9tXRChMhFQcwm4Y251 To DByYgzd4ec5Ku9vPag8XqoBfyRpsoj8Xs3 @TipDoge Sample - Backslash Fr DSDyv83VC1QtEnmJ4ATKFn5Sw3iC12VLmX To D9MsxSyJe5Mq7fWFRpC7zQQt1gexHccN4w Backslash To DJ3GL68kw8vh99RvxnEmQKE8A3cWRoEEqo Backslash Faucet Sample - Block.io To DE5QamzWVnxK2HmCS61cUsrn9iwgTArunU Block.io 

"OK, great, so now I have a list of my wallets. Now what?"

Now you're going to need the private keys for each of those wallets. Obviously you're not going to store these in a public place though. So you will need a separate file, which can just be plain text. Copy each of those addresses into it.
Now go ahead and fire up QT. If you haven't synced it in 3 years, its going to take forever, but that doesn't matter. You don't actually need the blockchain for this, so you don't have to wait for it to catch up.
Open up the console which is in the Help menu. Then give the command dumpprivkey with the wallet address you want the key to. Then use the up-arrow key to bring that command back, replace the address with the next one, and keep going until you have them all.
It will look something like this:
 13:05:18 Welcome to the Dogecoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. 13:11:06 dumpprivkey D9xDcRthB6XP4vRGqiyKdDfVJ7CWhYuBBi 13:11:06 6KEcssuq1wWUrFVmMF8yDxHuAdQMiRezz53zDxADLmyoXnix7iM 13:12:00 dumpprivkey DUDARNrGHVTFcCgriwRWgDQJPKDuDQr9jg 13:12:00 6JNk6NNFZcr49fbsD2jcTfTxFLjJKq9DHQ5JU8CYeZ2Cz6JdKMY 13:12:25 dumpprivkey DG6xnwCT6BXePaySqU85XocobZmhbJczQH 13:12:25 6JNXFv95Mp9SzehHw9jojjdxHRNPeh77qCsRbaNwJZMp9MKCAu3 
Yes, those are real wallets. But don't bother trying to steal my coins, I just generated them on https://walletgenerator.net/ and they're empty.
That's basically it. All you need to do is add some descriptions of what the wallets are, pretty up the format to your liking, and save copies in multiple, secure places, including printed out.

Remember, if you lose your keys, OR someone else sees them, you lose your coins!

If those were my real wallets above, you could use the keys and spend my coins. So obviously, don't let anyone else, especially annoying little brothers, get their grubby hands on them. But also make sure they can be discovered if anything happens to you. That's why the printed copies... nobody is going to go trolling through your porn or warez collection on the offchance there's something valuable in there. But they will look in your safe or wherever you store other important documents. Just be sure to leave a note as to what they are and how to use them. Remember the woman who came here a couple years ago who had found a USB stick with 110 BTC in a locked wallet.dat on it from her dead husband? I sometimes wonder if she ever got the money. Don't be her. Or him.

"OK, great. Now I have my keys. What now?"

Well, you can spend coins using https://coinb.in/#settings from any wallet you have the keys to. First step is to choose the network. Dogecoin (mainnet) obviously. Then go to Transaction in the +New menu. Enter your address and hit the Load button. It will pull in the first 100 transactions. Now enter the address to pay, and the amount.
Note the Transaction Fee box!
You want this amount to be zero. Depending on whether you're moving coins to another of your wallets to consolidate them (a very good idea.. go read the UTXO ELI5, which you will find a couple pages into https://www.reddit.com/dogecoin/comments/4yts6h/start_here_for_much_wallet_wow/ - Yes, I'm going to make you work for it, cos there's tons of useful stuff there you need to know), or paying someone else, you may want to select which inputs to use.
Once you're happy with the transaction, go ahead and submit it. You will now get a block of text, which is the raw, unsigned transaction. Copy this. Go to the Sign tab. Paste it. Add your private key and Submit to sign it.
After a little bit, you will get a signed transaction. Copy it. Go to the Broadcast tab, paste it and hit Submit.
That's it. It should go into the next block in a minute or two. Yes, even without paying a mining fee. Our network is so lightly loaded that there are no contention issues like the Bitcoin people have to put up with.

"That's it? So why do I need QT?"

You don't. The process above is all that's involved in spending coins. Everything else is window dressing. So there is no need to run QT, or any other client. Oh, and since you can download the site and run it locally (mostly offline), there is no security issue beyond the usual keyloggers/spyware that can compromise anything. And by knowing how to do this, you are much better protected from accidental loss than someone who blindly trusts black boxes they don't understand.
Oh, one final thing... if you really want to help the network by seeding rather than leeching, go ahead and run a full node. Instructions are in that link above. AND you may want to help seed the bootstrap file torrent from a couple of days ago. Just because YOU don't need it, doesn't mean others don't, right?
submitted by Fulvio55 to dogecoin [link] [comments]

IRC Log from Ravencoin Open Developer Meeting - Aug 24, 2018

[14:05] <@wolfsokta> Hello Everybody, sorry we're a bit late getting started
[14:05] == block_338778 [[email protected]/web/freenode/ip.72.214.222.226] has joined #ravencoin-dev
[14:06] <@wolfsokta> Here are the topics we would like to cover today • 2.0.4 Need to upgrade - What we have done to communicate to the community • Unique Assets • iOS Wallet • General Q&A
[14:06] == Chatturga changed the topic of #ravencoin-dev to: 2.0.4 Need to upgrade - What we have done to communicate to the community • Unique Assets • iOS Wallet • General Q&A
[14:06] <@wolfsokta> Daben, could you mention what we have done to communicate the need for the 2.0.4 upgrade?
[14:07] == hwhwhsushwban [[email protected]/web/freenode/ip.172.58.37.35] has joined #ravencoin-dev
[14:07] <@wolfsokta> Others here are free to chime in where they saw the message first.
[14:07] == hwhwhsushwban [[email protected]/web/freenode/ip.172.58.37.35] has quit [Client Quit]
[14:08] Whats up bois
[14:08] hi everyone
[14:08] hi hi
[14:08] <@wolfsokta> Discussing the 2.0.4 update and the need to upgrade.
[14:08] <@Chatturga> Sure. As most of you are aware, the community has been expressing concerns with the difficulty oscillations, and were asking that something be done to the difficulty retargeting. Many people submitted suggestions, and the devs decided to implement DGW.
[14:09] <@Tron> I wrote up a short description of why we're moving to a new difficulty adjustment. https://medium.com/@tronblack/ravencoin-dark-gravity-wave-1da0a71657f7
[14:09] <@Chatturga> I have made posts on discord, telegram, bitcointalk, reddit, and ravencointalk.org from testnet stages through current.
[14:10] <@Chatturga> If there are any other channels that can reach a large number of community members, I would love to have more.
[14:10] <@wolfsokta> Thanks Tron, that hasn't been shared to the community at large yet, but folks feel free to share it.
[14:10] When was this decision made and by whom and how?
[14:10] <@Chatturga> I have also communicated with the pool operators and exchanges about the update. Of all of the current pools, only 2 have not yet updated versions.
[14:11] <@wolfsokta> The decision was made by the developers through ongoing requests for weeks made by the community.
[14:12] <@wolfsokta> Evidence was provided by the community of the damages that could be caused to projects when the wild swings continue.
[14:12] So was there a meeting or vote? How can people get invited
[14:12] <@Tron> It was also informed by my conversations with some miners that recommended that we make the change before the coin died. They witnessed similar oscillations from which other coins never recovered.
[14:13] only two pools left to upgrade is good, what about the exchanges? Any word on how many of those have/have not upgraded?
[14:13] <@wolfsokta> We talked about here in our last meeting Bruce_. All attendees were asked if they had any questions or concerns.
[14:13] == blondfrogs [[email protected]/web/freenode/ip.185.245.87.219] has joined #ravencoin-dev
[14:13] == roshii [[email protected]/web/freenode/ip.41.251.25.100] has joined #ravencoin-dev
[14:13] sup roshii long time no see
[14:14] <@Chatturga> Bittrex, Cryptopia, and IDCM have all either updated or have announced their intent to update.
[14:14] == wjcgiwgu283ik3cj [[email protected]/web/freenode/ip.172.58.37.35] has joined #ravencoin-dev
[14:15] sup russki
[14:15] what's the status here?
[14:15] I don’t think that was at all clear from the last dev meeting
[14:15] I can’t be the only person who didn’t understand it
[14:15] <@wolfsokta> Are there any suggestions on how to communicate the need to upgrade even further? I am concerned that others might also not understand.
[14:17] I’m not sold on the benefit and don’t understand the need for a hard fork — I think it’s a bad precedent to simply go rally exchanges to support a hard fork with little to no discussion
[14:17] so just to note, the exchanges not listed as being upgraded or have announced their intention to upgrade include: qbtc, upbit, and cryptobridge (all with over $40k usd volume past 24 hours according to coinmarketcap)
[14:18] <@wolfsokta> I don't agree that there was little or no discussion at all.
[14:19] <@wolfsokta> Looking back at our meeting notes from two weeks ago "fork" was specifically asked about by BrianMCT.
[14:19] If individual devs have the power to simple decide to do something as drastic as a hard fork and can get exchanges and miners to do it that’s got a lot of issues with centralization
[14:19] <@wolfsokta> It had been implemented on testnet by then and discussed in the community for several weeks before that.
[14:19] == under [[email protected]/web/freenode/ip.72.200.168.56] has joined #ravencoin-dev
[14:19] howdy
[14:19] Everything I’ve seen has been related to the asset layer
[14:19] I have to agree with Bruce_, though I wasn't able to join the last meeting here. That said I support the fork
[14:20] Which devs made this decision to do a fork and how was it communicated?
[14:20] well mostly the community made the decision
[14:20] Consensus on a change is the heart of bitcoin development and I believe the devs have done a great job building that consensus
[14:20] a lot of miners were in uproar about the situation
[14:20] <@wolfsokta> All of the devs were supporting the changes. It wasn't done in isolation at all.
[14:21] This topic has been a huge discussion point within the RVN mining community for quite some time
[14:21] the community and miners have been having issues with the way diff is adjusted for quite some time now
[14:21] Sure I’m well aware of that -
[14:21] Not sold on the benefits of having difficulty crippled by rented hashpower?
[14:21] The community saw a problem. The devs got together and talked about a solution and implemented a solution
[14:21] I’m active in the community
[14:22] So well aware of the discussions on DGW etc
[14:22] Hard fork as a solution to a problem community had with rented hashpower (nicehash!!) sounds like the perfect decentralized scenario!
[14:23] hard forks are very dangerous
[14:23] mining parties in difficulty drops are too
[14:23] <@wolfsokta> Agreed, we want to keep them to an absolute minimum.
[14:23] But miners motivation it’s the main vote
[14:24] What would it take to convince you that constantly going from 4 Th/s to 500 Gh/s every week is worse for the long term health of the coin than the risk of a hard fork to fix it?
[14:24] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has quit [Ping timeout: 252 seconds]
[14:24] This hardfork does include the asset layer right? if so why is it being delayed in implementation?
[14:24] <@wolfsokta> Come back Tron!
[14:24] coudl it have been implement through bip9 voting?
[14:24] also hard fork is activated by the community! that's a vote thing!
[14:24] @mrsushi to give people time to upgrade their wallet
[14:25] @under, it would be much hard to keep consensus with a bip9 change
[14:25] <@wolfsokta> We investigated that closely Under.
[14:25] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has joined #ravencoin-dev
[14:25] <@wolfsokta> See Tron's post for more details about that.
[14:25] <@spyder_> Hi Tron
[14:25] <@wolfsokta> https://medium.com/@tronblack/ravencoin-dark-gravity-wave-1da0a71657f7
[14:25] Sorry about that. Computer went to sleep.
[14:26] I'm wrong
[14:26] 2 cents. the release deadline of october 31st puts a bit of strain on getting code shipped. (duh). but fixing daa was important to the current health of the coin, and was widely suppported by current mining majority commuity. could it have been implemented in a different manner? yes . if we didnt have deadlines
[14:27] == wjcgiwgu283ik3cj [[email protected]/web/freenode/ip.172.58.37.35] has quit [Quit: Page closed]
[14:27] sushi this fork does not include assets. it's not being delayed though, we're making great progress for an Oct 31 target
[14:28] I don’t see the urgency but my vote doesn’t matter since my hash power is still CPUs
[14:28] <@wolfsokta> We're seeing the community get behind the change as well based on the amount of people jumping back in to mine through this last high difficulty phase.
[14:28] So that will be another hardfork?
[14:28] the fork does include the asset code though set to activate on oct 30th
[14:28] yes
[14:29] <@wolfsokta> Yes, it will based on the upgrade voting through the BIP9 process.
[14:29] I wanted to ask about burn rates from this group: and make a proposal.
[14:29] we're also trying hard to make it the last for awhile
[14:29] Can you clear up the above — there will be this one and another hard fork?
[14:29] <@wolfsokta> Okay, we could discuss that under towards the end of the meeting.
[14:30] If this one has the asset layer is there something different set for October
[14:30] <@wolfsokta> Yes, there will be another hard fork on October 31st once the voting process is successful.
[14:31] <@wolfsokta> The code is in 2.0.4 now and assets are active on testnet
[14:31] Bruce, the assets layer is still being worked on. Assets is active on mainnet. So in Oct 31 voting will start. and if it passes, the chain will fork.
[14:31] this one does NOT include assets for mainnet Bruce -- assets are targeted for Oct 31
[14:31] not***
[14:31] not active****
[14:31] correct me if I'm wrong here, but if everyone upgrades to 2.0.4 for this fork this week, the vote will automatically pass on oct 31st correct? nothing else needs to be done
[14:31] Will if need another download or does this software download cover both forks?
[14:31] <@wolfsokta> Correct Urgo
[14:32] thats how the testnet got activated and this one shows "asset activation status: waiting until 10/30/2018 20:00 (ET)"
[14:32] Will require another upgrade before Oct 31
[14:32] thank you for the clarification wolfsokta
[14:32] <@wolfsokta> It covers both forks, but we might have additional bug fixes in later releases.
[14:32] So users DL one version now and another one around October 30 which activates after that basically?
[14:33] I understand that, but I just wanted to make it clear that if people upgrade to this version for this fork and then don't do anything, they are also voting for the fork on oct 31st
[14:33] Oh okay — one DL?
[14:33] Bruce, Yes.
[14:33] Ty
[14:33] well there is the issue that there maybe some further consensus bugs dealing with the pruneability of asset transactions that needs to be corrected between 2.0.4 and mainnet. so i would imagine that there will be further revisions required to upgrade before now and october 31
[14:33] @under that is correct.
[14:34] I would highly recommend bumping the semver up to 3.0.0 for the final pre 31st release so that the public know to definitely upgrade
[14:34] @under +1
[14:35] out of curiosity, have there been many bugs found with the assets from the version released in july for testnet (2.0.3) until this version? or is it solely a change to DGW?
[14:35] <@wolfsokta> That's not a bad idea under.
[14:35] <@spyder_> @under good idea
[14:35] @urgo. Bugs are being found and fixed daily.
[14:35] Any time the protocol needs to change, there would need to be a hard fork (aka upgrade). It is our hope that we can activate feature forks through the BIP process (as we are doing for assets). Mining pools and exchanges will need to be on the newest software at the point of asset activation - should the mining hash power vote for assets.
[14:35] blondfrogs: gotcha
[14:35] There have been bugs found (and fixed). Testing continues. We appreciate all the bug reports you can give us.
[14:36] <@wolfsokta> Yes! Thank you all for your help in the community.
[14:37] (pull requests with fixes and test coverage would be even better!)
[14:37] asset creation collision is another major issue. current unfair advantage or nodes that fore connect to mining pools will have network topologies that guarantee acceptance. I had discussed the possibility of fee based asset creation selection and i feel that would be a more equal playing ground for all users
[14:38] *of nodes that force
[14:38] <@wolfsokta> What cfox said, we will always welcome development help.
[14:38] So just to make sure everyone know. When assets is ready to go live on oct 31st. Everyone that wants to be on the assets chain without any problems will have to download the new binary.
[14:39] <@wolfsokta> The latest binary.
[14:39] under: already in the works
[14:39] excellent to hear
[14:39] == UserJonPizza [[email protected]/web/freenode/ip.24.218.60.237] has joined #ravencoin-dev
[14:39] <@wolfsokta> Okay, we've spent a bunch of time on that topic and I think it was needed. Does anybody have any other suggestions on how to get the word out even more?
[14:40] maybe preface all 2.0.X releases as pre-releases... minimize the number of releases between now and 3.0 etc
[14:41] <@wolfsokta> Bruce_ let's discuss further offline.
[14:41] wolfsokta: which are the remaining two pools that need to be upgraded? I've identified qbtc, upbit, and cryptobridge as high volume exchanges that haven't said they were going to do it yet
[14:41] so people can help reach out to them
[14:41] f2pool is notoriously hard to contact
[14:41] are they on board?
[14:42] <@wolfsokta> We could use help reaching out to QBTC and Graviex
[14:42] I can try to contact CB if you want?
[14:42] <@Chatturga> The remaining pools are Ravenminer and PickAxePro.
[14:42] <@Chatturga> I have spoken with their operators, the update just hasnt been applied yet.
[14:42] ravenminer is one of the largest ones too. If they don't upgrade that will be a problem
[14:42] okay good news
[14:42] (PickAxePro sounds like a Ruby book)
[14:43] I strongly feel like getting the word out on ravencoin.org would be beneficial
[14:44] that site is sorely in need of active contribution
[14:44] Anyone can volunteer to contribute
[14:44] <@wolfsokta> Okay, cfox can you talk about the status of unique assets?
[14:44] sure
[14:45] <@wolfsokta> I'll add website to the end of our topics.
[14:45] code is in review and will be on the development branch shortly
[14:45] would it make sense to have a page on the wiki (or somewhere else) that lists the wallet versions run by pools & exchanges?
[14:45] will be in next release
[14:45] furthermore, many sites have friendly link to the standard installers for each platform, if the site linked to the primary installers for each platform to reduce github newb confusion that would be good as well
[14:46] likely to a testnetv5 although that isn't settled
[14:46] <@wolfsokta> Thanks cfox.
[14:46] <@wolfsokta> Are there any questions about unique assets, and how they work?
[14:47] after the # are there any charachters you cant use?
[14:47] will unique assets be constrained by the asset alphanumeric set?
[14:47] ^
[14:47] <@Chatturga> @Urgo there is a page that tracks and shows if they have updated, but it currently doesnt show the actual version that they are on.
[14:47] a-z A-Z 0-9
[14:47] <@Chatturga> https://raven.wiki/wiki/Exchange_notifications#Pools
[14:47] There are a few. Mostly ones that mess with command-line
[14:47] you'll be able to use rpc to do "issueunique MATRIX ['Neo','Tank','Tank Brother']" and it will create three assets for you (MATRIX#Neo, etc.)
[14:47] @cfox - No space
[14:48] @under the unique tags have an expanded set of characters allowed
[14:48] Chatturga: thank you
[14:48] @UJP yes there are some you can't use -- I'll try to post gimmie a sec..
[14:49] Ok. Thank you much!
[14:49] 36^36 assets possible and 62^62 uniques available per asset?
[14:49] <@spyder_> std::regex UNIQUE_TAG_CHARACTERS("^[[email protected]$%&*()[\\]{}<>_.;?\\\\:]+$");
[14:50] regex UNIQUE_TAG_CHARACTERS("^[[email protected]$%&*()[\\]{}<>_.;?\\\\:]+$")
[14:50] oh thanks Mark
[14:51] <@wolfsokta> Okay, next up. I want to thank everybody for helping test the iOS wallet release.
[14:51] <@wolfsokta> We are working with Apple to get the final approval to post it to the App Store
[14:51] @under max asset length is 30, including unique tag
[14:51] Does the RVN wallet have any other cryptos or just RVN?
[14:52] == BruceFenton [[email protected]/web/freenode/ip.67.189.233.170] has joined #ravencoin-dev
[14:52] will the android and ios source be migrated to the ravenproject github?
[14:52] I've been adding beta test users. I've added about 80 new users in the last few days.
[14:52] <@wolfsokta> Just RVN, and we want to focus on adding the asset support to the wallet.
[14:53] == Bruce_ [[email protected]/web/freenode/ip.67.189.233.170] has quit [Ping timeout: 252 seconds]
[14:53] <@wolfsokta> Yes, the code will also be freely available on GitHub for both iOS and Android. Thank you Roshii!
[14:53] Would you consider the iOS wallet to be a more secure place for one's holdings than say, a Mac connected to the internet?
[14:53] will there be a chance of a more user freindly wallet with better graphics like the iOS on PC?
[14:53] the android wallet is getting updated for DGW, correct?
[14:53] <@wolfsokta> That has come up in our discussion Pizza.
[14:54] QT framework is pretty well baked in and is cross platform. if we get some qt gurus possibly
[14:54] Phones are pretty good because the wallet we forked uses the TPM from modern phones.
[14:54] Most important is to write down and safely store your 12 word seed.
[14:54] TPM?
[14:54] <@wolfsokta> A user friendly wallet is one of our main goals.
[14:55] TPM == Trusted Platform Module
[14:55] Ahhh thanks
[14:55] just please no electron apps. they are full of security holes
[14:55] <@spyder_> It is whats makes your stuffs secure
[14:55] not fit for crypto
[14:55] under: depends on who makes it
[14:55] The interface screenshots I've seen look like Bread/Loaf wallet ... I assume that's what was forked from
[14:55] ;)
[14:56] <@wolfsokta> @roshii did you see the question about the Android wallet and DGW?
[14:56] Yes, it was a fork of breadwallet. We like their security.
[14:56] chromium 58 is the last bundled electron engine and has every vuln documented online by google. so unless you patch every vuln.... methinks not
[14:56] Agreed, great choice
[14:57] <@wolfsokta> @Under, what was your proposal?
[14:58] All asset creation Transactions have a mandatory OP_CHECKLOCKTIMEVERIFY of 1 year(or some agreed upon time interval), and the 500 RVN goes to a multisig devfund, run by a custodial group. We get: 1) an artificial temporary burn, 2) sustainable community and core development funding for the long term, after OSTK/Medici 3) and the reintroduction of RVN supply at a fixed schedule, enabling the removal of the 42k max cap of total As
[14:58] *im wrong on the 42k figure
[14:58] <@wolfsokta> Interesting...
[14:59] <@wolfsokta> Love to hear others thoughts.
[14:59] Update: I posted a message on the CryptoBridge discord and one of their support members @stepollo#6276 said he believes the coin team is already aware of the fork but he would forward the message about the fork over to them right now anyway
[14:59] Ifs 42 million assets
[14:59] yep.
[15:00] I have a different Idea. If the 500 RVN goes to a dev fund its more centralized. The 500 RVN should go back into the unmined coins so miners can stay for longer.
[15:01] *without a hardfork
[15:01] <@wolfsokta> lol
[15:01] that breaks halving schedule, since utxos cant return to an unmined state.
[15:01] @UJP back into coinbase is interesting. would have to think about how that effects distribution schedule, etc.
[15:01] only way to do that would be to dynamicaly grow max supply
[15:02] and i am concerned already about the max safe integer on various platforms at 21 billion
[15:02] js chokes on ravencoin already
[15:02] <@wolfsokta> Other thoughts on Under's proposal? JS isn't a real language. ;)
[15:02] Well Bitcoin has more than 21 bn Sats
[15:02] Is there somebody who wants to volunteer to fix js.
[15:02] hahaha
[15:03] I honestly would hate for the coins to go to a dev fund. It doesn't seem like Ravencoin to me.
[15:03] Yep, but we're 21 billion x 100,000,000 -- Fits fine in a 64-bit integer, but problematic for some languages.
[15:03] <@wolfsokta> Thanks UJP
[15:04] <@wolfsokta> We're past time but I would like to continue if you folks are up for it.
[15:04] Yeah no coins can go anywhere centrality contorted like a dev fund cause that would mean someone has to run it and the code can’t decide that so it’s destined to break
[15:05] currently and long term with out the financial backing of development then improvements and features will be difficult. we are certainly thankful for our current development model. but if a skunkworks project hits a particular baseline of profitability any reasonable company would terminate it
[15:05] Yes let’s contibue for sure
[15:05] the alternative to a dev fund in my mind would be timelocking those funds back to the issuers change address
[15:06] But we can’t have dev built in to the code — it has to be open source like Bitcoin and monero and Litecoin - it’s got drawbacks but way more advantages- it’s the best model
[15:06] Dev funding
[15:06] i highly reccommend not reducing the utility of raven by removing permanently the supply
[15:07] == BW_ [[email protected]/web/freenode/ip.138.68.243.202] has joined #ravencoin-dev
[15:07] timelocking those funds accompllishes the same sacrifice
[15:07] @under timelocking is interesting too
[15:07] How exactly does timelocking work?
[15:07] <@wolfsokta> ^
[15:07] I mean you could change the price of assets with the Block reward halfing.
[15:07] == Roshiix [694[email protected]/web/freenode/ip.105.67.2.212] has joined #ravencoin-dev
[15:08] funds cant be spent from an address until a certain time passes
[15:08] but in a what magical fairy land do people continue to work for free forever. funding development is a real issue... as much as some might philosphically disagree. its a reality
[15:08] You’d still need a centralized party to decide how to distribute the funds
[15:08] even unofficially blockstream supports bitcoin devs
[15:08] on chain is more transparent imho
[15:09] == Tron_ [[email protected]/web/freenode/ip.173.241.144.77] has joined #ravencoin-dev
[15:09] @UJP yes there are unlimited strategies. one factor that I think is v important is giving application developers a way to easily budget for projects which leads to flat fees
[15:09] If the project is a success like many of believe it will be, I believe plenty of people will gladly done to a dev fund. I don't think the 500 should be burned.
[15:09] *donate
[15:09] centralized conservatorship, directed by community voting process
[15:10] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has quit [Ping timeout: 252 seconds]
[15:10] <@wolfsokta> Thanks Under, that's an interesting idea that we should continue to discuss in the community. You also mentioned the existing website.
[15:10] It would need to be something where everyone with a QT has a vote
[15:10] think his computer went to sleep again :-/
[15:10] I agree UJP
[15:10] with the website
[15:10] No that’s ico jargon — any development fund tied to code would have to be centralized and would therefor fail
[15:11] ^
[15:11] ^
[15:11] ^
[15:11] dashes model for funding seems to be pretty decentralized
[15:11] community voting etc
[15:11] Once you have a dev fund tied to code then who gets to run it? Who mediates disputes?
[15:11] oh well another discussion
[15:11] Dash has a CEO
[15:12] <@wolfsokta> Yeah, let's keep discussing in the community spaces.
[15:12] Dash does have a good model. It's in my top ten.
[15:12] having the burn go to a dev fund is absolute garbage
[15:12] These dev chats should be more target than broad general discussions — changing the entire nature of the coin and it’s economics is best discussed in the RIPs or other means
[15:13] <@wolfsokta> Yup, let's move on.
[15:13] just becuase existing implementation are garbage doesnt mean that all possible future governance options are garbage
[15:13] <@wolfsokta> To discussing the website scenario mentioned by under.
[15:13] the website needs work. would be best if it could be migrated to github as well.
[15:13] What about this: Anyone can issue a vote once the voting feature has been added, for a cost. The vote would be what the coins could be used for.
[15:14] features for the site that need work are more user friendly links to binaries
[15:14] <@wolfsokta> We investigated how bitcoin has their website in Github to make it easy for contributors to jump in.
[15:14] that means active maintenance of the site instead of its current static nature
[15:15] <@wolfsokta> I really like how it's static html, which makes it super simple to host/make changes.
[15:15] the static nature isn’t due to interface it’s due to no contributors
[15:15] no contribution mechanism has been offered
[15:15] github hosted would allow that
[15:16] We used to run the Bitcoin website from the foundation & the GitHub integration seemed to cause some issues
[15:16] its doesnt necessarily have to be hosted by github but the page source should be on github and contributions could easily be managed and tracked
[15:17] for example when a new release is dropped, the ability for the downlaods section to have platform specific easy links to the general installers is far better for general adoption than pointing users to github releases
[15:18] <@wolfsokta> How do people currently contribute to the existing website?
[15:18] they dont?
[15:18] We did that and it was a complete pain to host and keep working — if someone wants to volunteer to do that work hey can surely make the website better and continually updated — but they could do that in Wordpress also
[15:19] I’d say keep an eye out for volunteers and maybe we can get a group together who can improve the site
[15:19] == digitalvap0r-xmr [[email protected]/web/cgi-irc/kiwiirc.com/ip.67.255.25.134] has joined #ravencoin-dev
[15:19] And they can decide best method
[15:20] I host the source for the explorer on github and anyone can spin it up instantly on a basic aws node. changes can be made to interface etc, and allow for multilingual translations which have been offered by some community members
[15:20] there are models that work. just saying it should be looked at
[15:20] i gotta run thank you all for your contributions
[15:20] <@wolfsokta> I feel we should explore the source for the website being hosted in GitHub and discuss in our next dev meeting.
[15:21] <@Chatturga> Thanks Under!
[15:21] == under [[email protected]/web/freenode/ip.72.200.168.56] has quit [Quit: Page closed]
[15:21] <@wolfsokta> Thanks, we also need to drop soon.
[15:21] There is no official site so why care. Someone will do better than the next if RVN is worth it anyway. That's already the case.
[15:21] <@wolfsokta> Let's do 10 mins of open Q&A
[15:22] <@wolfsokta> Go...
[15:23] <@Chatturga> Beuller?
[15:24] No questions ... just a comment that the devs and community are great and I'm happy to be a part of it
[15:24] I think everyone moved to discord. I'll throw this out there. How confident is the dev team that things will be ready for oct 31st?
[15:24] <@wolfsokta> Alright! Thanks everybody for joining us today. Let's plan to get back together as a dev group in a couple of weeks.
[15:25] thanks block!
[15:25] <@wolfsokta> Urgo, very confident
[15:25] Please exclude trolls from discord who havent read the whitepaper
[15:25] great :)
[15:25] "things" will be ready..
[15:25] Next time on discord right?
[15:25] woah why discord?
[15:25] some of the suggestions here are horrid
[15:25] this is better less point
[15:25] == blondfrogs [[email protected]/web/freenode/ip.185.245.87.219] has quit [Quit: Page closed]
[15:25] Assets are working well on testnet. Plan is to get as much as we can safely test by Sept 30 -- this includes dev contributions. Oct will be heavy testing and making sure it is safe.
[15:26] people
[15:26] <@wolfsokta> Planning on same time, same IRC channel.
[15:26] == BW_ [[email protected]/web/freenode/ip.138.68.243.202] has quit [Quit: Page closed]
[15:26] @xmr any in particular?
[15:27] (or is "here" discord?)
[15:27] Cheers - Tron
[15:27] "Cheers - Tron" - Tron
submitted by Chatturga to Ravencoin [link] [comments]

BitN00B: Help with Python/JSON call : getNewAddress(account) - fail

When making a JSON call, RPC to bitcoind, what is "account" parameter in getNewAddress(account).
Does anyone have actual code to demo this? This is frustrating given how much time I have spent ( a day ),
trying to get this to work in code, trying different things, googling all over, following things to a dead end.

In my Bitcoin QT, I see no reference to "account", I don't know what to put there as a parameter.

Reference:
https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list#Full_list

If I leave it blank, or I make up something to put there, I get a socket timeout.
I can successfully call: getblockchaininfo() (no params), and a few others with no socket timeout, but not getNewAddress. Anything and everything requiring a parameter fails.
--
Also if anyone can help, I please need a clear concise example of sending a transaction. I can find no good code examples on how to create a raw transaction and send with any Python/RPC/Bitcoind library out there. None. It should not take more than a few lines of code to send a transaction.
  1. set variables in a data structure
  2. make a call to send the transaction (that's it). The library will take params from the data structure, construct a raw transaction, convert that raw transaction to the format it needs when sending over http (json/rpc), as it does and I understand it to work that way.
    I would like to have the raw transaction printed out to debug, both raw transaction and the actual hex code that is sent.
    Thank You,
    JC
submitted by ThisCryptoFail to Bitcoin [link] [comments]

Lost most of my Doge late 2013. There may be one last solution to getting some back. Does anyone have a copy of "DogeCoin version v0.6.4.0-unk-beta" or know which release it is directly linked to?

My keys corrupted and i didn't have a recent backup, after the upgrade lost all the doges.

I think there might be one more hope of finding some, and would appreciate if anyone knows which version " v0.6.4.0-unk-beta" which is on the debug.log output.

Noticed after all this time after digging through Bitcoin release notes that before bip32/hd wallets came in or as a matter of fact As they came in too (thanks devs). Most if not everyone i asked thought backing up the wallet.dat file is good enough, or the old --salvagewallet nor -zapwalletxes. They either aggressively scrambled the wallet making it more likely destroy even more keys, sure saved a few coins but most of the addresses in the keypool which has a size of 100 didn't have a corresponding private key anywhere in the wallet AFAIKT,
Sorry before i rant, i just need some info on if this wallet if linked to a specific Dogecoin version and just happens to say v0.6.4.0 in the debug log file.

I can't update directly to any other version without the wallet breaking up. Apparently i need the exact version that was last used, and turn it off extra safely so the log files which hold some parts of the keys go back to the Wallet.dat or something.

I tried all solutions, this might just work. from the "Bitcoin version 0.7.1 Readme file."
How to Upgrade
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you were running on Linux with a version that might have been compiled with a different version of Berkeley DB (for example, if you were using an Ubuntu PPA version), then run the old version again with the -detachdb argument and shut it down; if you do not, then the new version will not be able to read the database files and will exit with an error.
Explanation of -detachdb (and the new “stop true” RPC command): The Berkeley DB database library stores data in both “.dat” and “log” files, so the database is always in a consistent state, even in case of power failure or other sudden shutdown. The format of the “.dat” files is portable between different versions of Berkeley DB, but the “log” files are not– even minor version differences may have incompatible “log” files. The -detachdb option moves any pending changes from the “log” files to the “blkindex.dat” file for maximum compatibility, but makes shutdown much slower. Note that the “wallet.dat” file is always detached, and versions prior to 0.6.0 detached all databases at shutdown.
or on shut down the coin client using the -detatchdb comas coins use both log and dat files with berkeley.

Thanks,

D_M


submitted by doge_messiah to dogecoin [link] [comments]

Gridcoin Developer Update May 7th, 2018

Hello everyone and welcome to another Developer Update from the Gridcoin team. I'd like to remind everyone that these posts will be created every two weeks unless a wallet update is pending that week.
 
The last two weeks have largely been spent preparing for the next leisure release. The release would have come sooner, but some last minute additions to the staging branch were pulled in since the previous update post. Some of these pull requests have included:
 
Testnet has been working with PR #1060 which was mentioned in the last Developer Update post. I can now happily report that two superblocks have been successfully staked on testnet by Linux clients using contract forwarding. These results are extremely promising and will be a welcome addition for improved superblock stability on mainnet.
In the coming days I expect a new staging build to be ready for testnet deployment so testing will refocus soon on the PRs mentioned in this post.
 
While not entirely wallet related, I did want to point out some behind the scenes improvements for the https://gridcoin.us website. The site now properly redirects to HTTPS and supports TLS 1.2. Our site is now rated "A+" by SSL Labs. Thanks to our founder Rob for making these changes!
 
Thanks for reading this edition of the Developer Update. Expect to see another update two weeks from today (5/21), unless there is a wallet update released between now and then. If you have any comments or questions for the Gridcoin development team feel free to ask in the comments below. If I am not able to answer your question directly, I can certainly forward it to someone who can!
submitted by barton26 to gridcoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Bitcoin RPC Remote Code Execution Exploit for BitcoinCore 0.9-0.15.1 CVE-2017-9230 6. bitcoin-qt Programming Bitcoin-qt using the RPC api (1 of 6) Bitcoin-Qt Client Update 0.8.6 Explained 9. bitcoind

Bitcoin-Qt version 0.8.1 is now available from: ... so looking up an arbitrary transaction using the getrawtransaction RPC call will not work. If you need that functionality, you must run once with -txindex=1 -reindex=1 to rebuild block-chain indices (see below for more details). Improvements. Mac and Windows binaries are signed with certificates owned by the Bitcoin Foundation, to be ... Bitcoin software has both a graphical interface called bitcoin-qt and a console interface, bitcoind. If the first is convenient for human use, then without a text it is quite difficult to make an online store or any other service that accepts bitcoins as a payment. About it and speech will go. To work you need to run one instance of bitcoin as a daemon, so he worked as a full-fledged host on ... Original Satoshi clients: Only the bitcoin releases 0.1.0 up to 0.1.5 which supported only Windows 2000 / Windows NT and Windows XP (perhaps Windows Vista). The next bitcoin release 0.2.0 from Dec 2009, nearly a year later, starts to support Linux and the community got more and more actively involved in the development. Bitcoin.org is a community funded project, donations are appreciated and used to improve the website. Make a donation In this article we’ll share some of the basic commands that you can use to interact with your Bitcoin core RPC console. Bitcoin core QT client is the original Bitcoin wallet and a full node that has features most other Bitcoin wallets don’t have. It builds the backbone of the network. It offers full validation and high level of privacy, security and stability. The wallet is available for ...

[index] [36055] [38734] [19442] [21284] [12041] [31301] [23311] [6676] [42102] [22706]

Bitcoin RPC Remote Code Execution Exploit for BitcoinCore 0.9-0.15.1 CVE-2017-9230

This video is unavailable. Watch Queue Queue. Watch Queue Queue Programming Bitcoin-qt using the RPC api (1 of 6) - Duration: 3:17. Lars Holdgaard 4,609 views. 3:17. Bitcoin-QT wallet review - Duration: 8:53. Secure Your Wallet Recommended for you. 8:53 . Web ... Bitcoin JSON-RPC Tutorial 4 - Command Line Interface - Duration: 5:14. m1xolyd1an Recommended for you. 5:14. Bitcoin Lightning Network Tutorial Part 1 - Setup Bitcoind - Duration: 15:10. ... How to run Bitcoin-qt as a server with a configuration file (3 of 6) ... Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf - Duration: 8:10. m1xolyd1an 13,459 views. 8:10. Building a Blockchain in Under ... In this video I try to explain the new bitcoin client update for the average user, hope you enjoy. Twitter: https://twitter.com/JPSchaumleffel Reddit: http:/...

#